Guest_imported
New member
- Jan 1, 1970
- 0
iam behind a firewall and i need my program to connect to a site. how can i do that?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How can I make a connection through a proxy ?
- Thread starter Guest_imported
- Start date
- Status
- Thread starter
- #2
Guest_imported
New member
- Jan 1, 1970
- 0
Hi,
First u find out the machine where the gateway is running has got internet connection, then check out on which port the gateway is running,now in ur client programme set the port number and machine IP of the gateway.I hope it will work fine.......
cheers
Deepak
First u find out the machine where the gateway is running has got internet connection, then check out on which port the gateway is running,now in ur client programme set the port number and machine IP of the gateway.I hope it will work fine.......
cheers
Deepak
As Above:
For Example, with Internet Explorer if your firewall was on
a server (say Delila) which had port 8080 configured for http Internet access then you would open the client program (Internet Explorer) and go to Tools - Internet Options - Connections - LAN Settings. Leave Automatic Configuration alone and check the box for 'use proxy' entering 'Delila' and 1082 in the Address and Port edit boxes.
Hope this helps.
For Example, with Internet Explorer if your firewall was on
a server (say Delila) which had port 8080 configured for http Internet access then you would open the client program (Internet Explorer) and go to Tools - Internet Options - Connections - LAN Settings. Leave Automatic Configuration alone and check the box for 'use proxy' entering 'Delila' and 1082 in the Address and Port edit boxes.
Hope this helps.
- Status
Similar threads