How can I Install sco openserver 5.04 on Dell Power Edge 2650

[Serkanm]

Hi...
I have Dell power edge 2650 server and sco open server 5.04...
i have a problem installation to 5.04 on dell 2650
i did do that...
i started with boot disk
(dell server have adaptec raid5 card)
during boot i wrote that parameter defbootst link=percraid Srom (0,0,0,0)
(cd rom ide, not scsi)
during boot i ican see cd rom and hdd's (1 hdd 73 gb i have 3x73)
i configured another parameters (cd rom, computer name, nic card, domain name,)
unix will start setup but the machine waiting...
hdd's working but cd rom is not...
i thing open server looking for hdd's but not find
i dont receive any error message... only wait
where is my fault the operation

thanx advanced for helps

 

[stanhubble]

SCO 5.0.4 will not install on a Xeon or P4 system.
same with 5.0.5

you must use 5.0.6a or later.

 

[Serkanm]

thanx for help but ý ýnstalled 5.05

 

[stanhubble]

serkanm 5.0.5 "may" install but it will not operate reliably and could potentially damage the Xeon processors.