Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How can I configure the Client verification cycle when using SP 5?

Status
Not open for further replies.
Sep 16, 2003
76
US
Hello All,


Using SMS 2.0 and SP 5 I'm trying to add some components to the client PC in my lab. I'm new to this, but after seeing that the client was not taking the new components I enabled on the site, I found out that the clients only verify with the site every 29 days. Is this right? Anyway, after even more searching on the web, it looked like I could use Cliverify.exe to change this interval. So I d/l Cliverify.exe and when I executed it, it gave me the message:

"The version of SMS 2.0 you are running includes specific changes that eliminate the need to use this utility..."

Can someone please tell me how to configure the client verify settings?


Thanks,


Jay
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top