How 2 swap CPU's @ midnight? optinon 61 R21 1

[ARNOLD001]

Hello,
I would like to thank everyone for all your help through out the year.
This is a wonderful forum. Having said that, I have a Option 61 release 21. Now I Noticed that only one of our Cpu’s is always in use. According to the programming this is true:

OVLY
SID 808
BKGD 044
PBXH X
TODR 02
DROL 030 034 035 036 037 038 039 043 060
CACH 32
PRTY
MULTI_USER ON

Is it true, that in order to have the Cpu’s swap at midnight, I should simply insert a 135 under the DROL command in Ld 17 (chg). Are there any tests I should run on the inactive CPU before doing this? I see a red light labeled “RST” on a QPC580A card of the inactive CPU.
Thanks again.

 

[acewarlock]

The red lite indicates which CPU is idle.
Go to LD 135 and do a TCPU, if it comes back OK then
Add 135 to DROL

 

[ARNOLD001]

Is there a reason wy I get an incorrect parameters when I type LD 135 example:
>LD 135
OVL014
>

I can't get past the prompt. No one is logged in to the systme but me. by the way; Thanks for the quick response.

 

[acewarlock]

Try LD 35 and do TCPU

 

[omarrj]

ld 135 is not available on rlse 21

 

[freddog]

LD 135 is available in Rls 21 if you have a 61C.

 

[ARNOLD001]

Thanks, got that taken care of last tuesday. I apologize, for not posting my results earlier.