How 2 integrate Definity with data T1?

[Zu56]

Hi,
We are installing new T-1 which will carry data and want to send voice over it. On the remote side everything is fine (I think), when T-1 comes to the main building how do I integrate it with the Definity switch? G3si v.12 What equipment do I need? I have CLAN installed
Thank you

 

[lopes1211]

This could mean a lot of things. What is the other end? Is it a point to point? Are there channels for voice broken out by a csu/dsu or is it 100% data?

-CL

 

[Zu56]

Other end starts withh IP406, than Cisco 2960G-24 switch than Cisco 1841 router than p2p T-1 to the main building. Than it is opposite back to Cisco 2960G. From this point i need to extract voice and send it to Definity. I am using UDP to keep the existig extensions.
If you have more questions, please ask, I'll do my best to answer them.
Thank you

 

[Zu56]

OK, I probably asked the question in the wrong way. I can’t believe that this is impossible.
Generally: how do I run voice and data on one point-to-point T-1 with Definity G3si v12 and IP Office 406? What equipment do I need?
Thank you