Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hotlines

Status
Not open for further replies.
PERRYPJ

PERRYPJ

Technical User
Jul 5, 2002
4,323
US
Ok guys put on your thinking caps and give me a blow by blow procedure to make a Analog module line a hotline to a outside line. As in a Fax that can't dial 9 to get an outside line, I've done it before but for the life of me I can't get thr damn thing to work.

OLD ROLMEN WORKING ON NORTELS
 
Sort by date Sort by votes
For the station # select Hotline-External-outdail a F78- and use POOL'A' as prime. Give the station access to POOL'A' in Line access.
 
Upvote 0 Downvote
1. Under Services, build a Route and point it to a Pool Group. Then build a Destination Code and point it to the Route.
2. Under Terminals & Sets/Line Access change PRIME LINE: NONE to INTERCOM for the analog station.
3. Under Terminals & Sets/Capabilities change HOTLINE: __ to be EXTERNAL, then HOTLINE DIGITS DIALED OUT: to be the Destination Code in step 1 and then change the USE LINE: __ to be USE ROUTING TABLE.
4. Give the station in question Line Pool Access to the Pool Group in step 1.

Good Luck!!
 
Upvote 0 Downvote
THANKS GUYS

OLD ROLMEN WORKING ON NORTELS
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top