Hotline with analog and/or IP phones

[T8keiteasy]

ICP 3300 Mxe
8.0.9.18

Related to thread1329-1354517, with new version (up to 8.0 UR3 for sure), IP phone should be able to be programmed as hotline...

My problem is that analog phone can't be programmed as hotline (anymore). It use to be ok. I've upated the ICP, but I don't remember if I've programmed the hotline, before or after it...

It works with Ip phones, but when trying analog sets it says : "directory number cannot have the given association"...
I have programmed on analog same COS and intercept and inteconnec that IP phone but still not working...

Any idea ?
Is update the clue ?

Now, it's about French users too !!!

 

[MitelInMyBlood]

Make sure it's not a key line appearance somewhere... Key system DNs cannot be ARD (Auto ringdown/hotline)

 

[T8keiteasy]

No, for sure, it seems to be a bug !!
I've deleted an associated number and it was not possible to add it again...

DB was restored on another ICO and seems to be ok.
I guess i'll have to install a new software and then restore my DB....



Now, it's about French users too !!!

 

[Mitelmatt]

Mitelin myblood, fyi as of 8UR3 keysystem and Multicall as well as IP phones can now be used as hotlines. Works great...
Will try an analogue T*keiteasy and see what happens

 

[T8keiteasy]

I have a database corruption...not good :-(

Thanks

Now, it's about French users too !!!

 

[Mitelmatt]

ooh nice! Restore database coming up!! :)