HOT D not working

[km9v]

I'm trying to get a couple of analog sets to dial 9 before dialing. When I try to chg the TN to add FTR HOT D 1 9, I get SCH3060 & SCH0355 errors.
What am I missing?


REQ: chg
TYPE: 500
TN 32 0 4 15
ECHG yes
ITEM ftr hot d 1 9 SCH3060
FTR SCH0355
FTR
SCH0355

REQ: prt
TYPE: tnb


TN 32 0 4 15
DATE
PAGE
DES

DES OCB011
TN 032 0 04 15 VIRTUAL
TYPE 500
CDEN 4D
CUST 0
ERL 00000
WRLS NO
DN 5868 94 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
LNRS 16
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR MCDD T87D PKCH
PLEV 02
AACS NO
MLWU_LANG 0
DATE 11 AUG 2016

 

[Wanebo]

SCH0355
Unable to match input field with stored mnemonics.

Severity: Info

SCH3060
Class of Service must be MNL.

Severity: Info

 

[km9v]

Ah, I see the error of my ways. Thank you kind sir.

 

[Firebird Scrambler]

It might be much easier to use the pre translation feature.


Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Very advance high level knowledge on Linux BCM with keycode support

http://www.linkedin.com/in/davidbromley

 

[KCFLHRC]

Did this actually work for you? Using HOT D 1 9 ?? My guess is it didn't

 

[km9v]

Did this actually work for you? Using HOT D 1 9 ?? My guess is it didn't"

No, it didn't. It made the line not work at all. Had to out it & create it again. Sounded good on paper.

 

[Firebird Scrambler]

As I've said previously, the Pre Translation Feature works OK.

I have attached an old guide for you to try.


Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Very advance high level knowledge on Linux BCM with keycode support

http://www.linkedin.com/in/davidbromley