Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hostid
- Thread starter dcomit
- Start date
Here are the examples from the hostid man pages:
Examples
1. To set the identifier of the local host to the local Internet address with
the hostid command, enter the command in the following format:
hostid 192.9.200.3
0xc009c803
The hostid command converts the Internet address 192.9.200.3 into the
hexadecimal representation 0xc009c803, and then sets the local host (your
workstation connected to a network) to this address.
2. To display the identifier of the local host, enter:
hostid
0xc009c803
The hostid command displays the identifier of the host as a hexadecimal
number.
Examples
1. To set the identifier of the local host to the local Internet address with
the hostid command, enter the command in the following format:
hostid 192.9.200.3
0xc009c803
The hostid command converts the Internet address 192.9.200.3 into the
hexadecimal representation 0xc009c803, and then sets the local host (your
workstation connected to a network) to this address.
2. To display the identifier of the local host, enter:
hostid
0xc009c803
The hostid command displays the identifier of the host as a hexadecimal
number.
- Status
