Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HOST_BIND_BAD_FRU_CONFIGURATION

Status
Not open for further replies.
FunisFun

FunisFun

Technical User
Aug 1, 2006
1
US
thread511-1060267

In the thread mentioned above, I found the problem HOST_BIND_BAD_FRU_CONFIGURATION, but there was no solution. I realize the post is old, but my google found it so I thought I would post the solution I found to the problem.

I received this error when I was trying to bind a bunch of disk together into a Raid 5 array. I went through each of the disks I was trying to bind and they said they were "UNBOUND". The problem was that they disks were part of a raid group, but not bound. When I did the FCLI command sg -l I saw that they were part of a group. I deleted the group and they bound up just fine.

Regards,
 
Sort by date Sort by votes
Hi,

There are two ways to fix this problem:
Upgrade to the latest version of FLARE Release 16 / 19, which has a fix for this problem; or

Manually edit the disks to remove the RAID group definition. Contact EMC Technical Support for assistance if this option is the required solution.

Cheers Novelli
Novell Master CNE + CDE
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top