I have a new ML370 running WINNT 4.0 SP6.0a, 4-9.1GB 10k Ultra3 in a Raid5 configuration with an online spare. When the server boots I recieve the following message "Host System does not support PCI Data Bus Parity Checking". The message is displayed after the memory count but before the server sees the array controller (SmartArray 221). The array controller is located in slot 2. I also updated the BIOS to 8/24/00 but the message still appears. Any insight would be appreciated. TIA
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Host System does not support PCI Data Bus Parity Checking
- Thread starter maguilar
- Start date
Similar threads
- Locked
- Question