I'm trying to hook up an external modem (US Robtics 56K Faxmodem) on a option 11 with S/W Release 2355. I have a cable that has 3 cords coming from it pluged into SLV P2. Port zero works fine for local programming. I have this modem pluged into Port 1 with the "modem eliminator" removed. Is this the correct port and if so how do I program it so that I can come in remotely into the system?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hook up a external Modem on a OPT 11
- Thread starter dnava
- Start date
acewarlock
Technical User
You don't want to run at 1200buad, you'l be there all date trying to get anything done. Change 9600 baud at least.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
