For future reference:
802.1X
8 0 2 1 9 (8 0 2 1 X)
Set the 802.1X Operational Mode.
Static addressing
A D D R (2 3 3 7)
Static Addressing Installation.
Automatic Gain Control
A G C (2 4 2)
Disable/Enable Automatic Gain Control.
Visual Alerting mode control
A L E R T (2 5 3 7 8)
Visual/Audible Alerting Procedure.
DHCP chaddr field value
C H A D D R (2 4 2 3 3 7)
Manually Setting the DHCP Client Hardware Address.
Clear values to factory defaults
C L E A R (2 5 3 2 7)
Clear Procedure.
Contrast Control
C O N T (2 6 6 8)
Adjusting the Contrast Control.
Computer-Telephony Integration
C T I (2 8 4)
Computer-Telephony Integration (CTI) Enable/Disable.
FKEU (XMOD) Enable/Disable
F K E U (3 5 3 8 #)
Enabling/Disabling the FKEU (XMOD) Interface
Group Identifier
G R O U P (4 7 6 8 7)
Group Identifier.
PC Ethernet Interface
I N T (4 6 8)
Interface Control.
Event Logging
L O G (5 6 4)
Disable/Enable Event Logging.
Log off the telephone
L O G O F F (5 6 4 6 3 3)
Logoff.
Turn Display Backlight Off
O F F (6 3 3)
Turning Off the Backlight.
Quality of Service options
Q O S (7 6 7)
QoS Option Setting.
Reset the telephone
R E S E T (7 3 7 3 8)
Reset System Values.
Restart the telephone
R E S E T (7 3 7 3 8)
Restart the Telephone.
Signaling protocol identifier
S I G (7 4 4)
Signaling Protocol Identifier.
Site-Specific Option Number
S S O N (7 7 6 6)
Site-Specific Option Number Setting.
Layer 2 frame tagging control (4601/4601+ only)
T A G (8 2 4)
Setting L2Q Tagging Control (4601 Only.
Test the telephone
T E S T (8 3 7 8)
Self-Test Procedure.
View System Parameter Values
V I E W (8 4 3 9)
The View Administrative Option
Language Option
L A N G (5 2 6 4) Only 4620 1.72 and later
Change the language of the phone
ACSS (SME)
APSS (SME)
