Hold down for "Amphenol" connector 2

[Servamatic]

Does anyone have a source for the metal and velcro hold down devices for telco patch panels with RJ-21X Connectors (Amphenol, 25 pair)?
A web site post would be greatly appreciatewd if you know of a source.

Richard S. Anderson, RCDD

http://www.servamatic.net

 

[jeffmoss26]

Do you mean the velcro hold-downs?

jeff moss

 

[mikeydidit]

Richard, Panduit makes rolls of velcro that you could use. The pn. is HLS-15RO. It seems that you could cut this to lenght for what you are after.

Mike Jones
LSUHSC

 

[Servamatic]

The item I am looking for is a metal bracket that screws down between the RJ-21X connector on the cable and the panel circuit board, it has a velcro strap that goes through the metal bracket and then around the RJ-21X to hold it in place.
No way to attach just velcro.
Hope this helps...Thanks

Richard S. Anderson, RCDD

http://www.servamatic.net

 

[mikeydidit]

I called Siemons technical support for you Richard. They tell me the part number that you are after is SUHAR_1C-B. This comes with the velcro fastener.

Hope this helps.

Mike Jones
LSUHSC

 

[Servamatic]

THANK YOU Mike

I found it finally on their web site.

http://www.siemon.com/us/oem/holdown.asp

Richard S. Anderson, RCDD

http://www.servamatic.net

 

[mikeydidit]

The least I could do Richard as many times as you have helped me with my problems. Glad that is what you needed.

Mike Jones
LSUHSC