Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HMS400 configure dialogic hmp

Status
Not open for further replies.

jakeemerson

Technical User
Apr 3, 2012
23
US
I have installed the image on the HMS server and the next steup is to "configure dialogic HMP". the install guide says to....

1. Select Start > All Programs > Dialogic HMP > Cofiguration Manager DCM.
2. In the Configuration Manager window, right-click HMP_Software #0 in slot
0/65535 and select Configure Device.
3. In the Properties window, select the Default IP Address tab.
4. Ensure the correct IP address is bound to the HMP Drivers.


What do I use for the default IP address? Is it the IP address of the server?


tHANKS! Jake
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top