Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HL950 1

Status
Not open for further replies.

TRIDENT100

Technical User
Oct 1, 2003
88
NO
Can anybody help:

I have 2 LIM no GS:

LIM1
set interface line x1 ,tmode=framed ,cmode=slave ,idle=0x54


Status Running
Name LIM1
IP 10.1.10.2
CES Type SDT
Mode ECES
Payload ms/bytes 1ms / 72bytes
Port 2141
Fill 47
Idle 0x54
Mask 0x000101FE
Dynamic No
RTP Header Yes
Time stamp Res 256khz
Speed 576kbps
JB Configuration 10ms
Clock Mode External
Time Started TUE NOV 30 09:04:57 2004
***********************************************************

LIM2
set interface line x1 ,tmode=framed ,cmode=master ,idle=0x54

Status Running
Name LIM2
IP 10.1.10.1
CES Type SDT
Mode ECES
Payload ms/bytes 1ms / 72bytes
Port 2141
Fill 47
Idle 0x54
Mask 0x000101FE
Dynamic No
RTP Header Yes
Time stamp Res 256khz
Speed 576kbps
JB Configuration 10ms
Clock Mode Adaptive
Adapted Clock 2048000
Time Started TUE NOV 30 09:02:44 2004
***********************************************************
***********************************************************
This is not working, but if I change MODE=AXERRA it`s working fine.

I use MASK=0x101fe bacause I only want to use 8 CHL for voice between LIM1-LIM2.

 
Hi Trident,
structured CESoIP only works in axerra compatibility mode
page 51 HL950 administrator guide
 
ok I have seen that,but if you want to BUNDLE you must use CESOIP=ECES

/*Trident*/
 
What release are you using?
in release 2.0 only valid parameters for cesoip are axerra/rad
for release 1.2:
NOTE: The cesoip=eces parameter will only be accepted if a valid license for dbces was entered in the system with the
"set system license key=XXXX"

 
I have the lic:

License Management:
-------------------

License Key: BYHT-UXTR-9SRJ-2HXN-R2NY
Serial No: X370002696

Name Licensed
-----------------------

DBCES YES

[EXECUTED]
 

Multi Service Edge Device, Copyright (c) 2004 Ericsson AB

Software info:
CPU: MSP5000 Processor
OS Version: VxWorks5.4.2
Release ver: CXC 132 7936 R1A015
Creation date: Apr 16 2004, 15:45:25

Bootrom info:
Release ver: CXC 132 4132 R3A004
 
latest firmware
bootrom CXC 132 4132 (Soccer 2.0.029)
Jogware CXC 132 4346 (Carlsberg 1.99.014)
 
Thanks!!

I will upgrade, but do you know where om Info Channel the files are??

 
sorry, no.
But did you start the transmission of ECES?
add ces bundle name=<name>, mask= 0xyyyyyyy,dyn=yes,red=no;
 
if you have infochannel access look for lazydog on using HL 950 for remote lim
 
It`s working now. I needed to reenter the license for bundle after config reset.
Thanks for info DUFQI

/*Trident*/
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top