HL950 protocol and portrange

[jos00]

Hi.

I need som technical information about HL950:

I will use a pair of HL950 between GS and a LIM 3. This trafic will be transportet on an 10 Mb/sec line, where ordinary datatrafikk and videoconference also will be transportet. To achive the right priority I wish to use diffserv.
How is the setup for achiving diffserv in the HL950?

What protocol an portrange do the HL950 use for this ?

Regards jos00

 

[fidde]

The priority depends on configuration of the "line" you need to ask the provider what value to set to achive priority.

The HL950 use default port 2142 (you can change it with configuration) and it runs a rtp kind of protocoll.