HiPath4000 ISDN PRI status "Ready/CP"

[nspitzer]

I am trying to bring up a new circuit in a new trunk group and cannot make outbound calls. The carrier says everything looks good on their end. I verified the circuit protocol is NI2. I believe the circuit needs to show status "Ready" in Dis-SDSU but all the BChannels show "READY/CP". Is there a step I forgot or did I configure something wrong?

DISPLAY-BSSU:1,2,103,0,,;
H500: AMO BSSU STARTED
H40: PARAMETER CIR IGNORED. FOR TMDN/DIU2U BOARD
DATA OF WHOLE BOARD WILL BE DISPLAYED: 1.2.103 .
CIRCUIT 0 :
+==============================================================================+
| 24 HOUR TOTAL STATISTICS FOR TMDN/DIU2U LTG.LTU.EBT : 1 .2 .103
+------------------------------------------------------------------------------+
| ESF 28 |
| ES 0 FS 0 |
| BES 0 OES 0 |
| US 0 DS 0 |
+------------------------------------------------------------------------------+
| LOOPBACK STATUS: |
| |
| LOCAL : SET PAYLOAD : CLEAR |
| REMOTE REQUEST : SET |
+------------------------------------------------------------------------------+
| |
| ALARM STATUS : NO ERRORS(GREEN) |
+------------------------------------------------------------------------------+
H53: CIRCUIT 1 IS NOT CONFIGURED, NO STATISTIC OUTPUT POSSIBLE.

AMO-BSSU -111 BOARD SWITCH, SWITCHING UNIT
DISPLAY COMPLETED;
<
AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT
DISPLAY COMPLETED;
<DIS-SDSU:ALL,,PEN,PER3,1,2,103,0;
DIS-SDSU:ALL,,PEN,PER3,1,2,103,0;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-L80XF--------SG 1 LTU 2 --------------------- READY
** .LTG 1.LTU 2.103 DIU2U-M A Q2216-X READY
CCT LINE STNO SI BUS TYPE
000 5881 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN TRS/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
002 NETWORK SUBUNIT . TMD CO ISDN CP/RES
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH/CP
003 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
004 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
005 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
006 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
007 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
008 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
009 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
010 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
011 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
012 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
013 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
014 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
015 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
016 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
017 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
018 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
019 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
020 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
021 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
022 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
023 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
024 NO CONN
025 NO CONN
026 NO CONN
027 NO CONN
028 NO CONN
029 NO CONN
030 NO CONN

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT
DISPLAY COMPLETED;
<DISPLAY-BSSU:1,2,103,0,,;
DISPLAY-BSSU:1,2,103,0,,;
H500: AMO BSSU STARTED
H40: PARAMETER CIR IGNORED. FOR TMDN/DIU2U BOARD
DATA OF WHOLE BOARD WILL BE DISPLAYED: 1.2.103 .
CIRCUIT 0 :
+==============================================================================+
| 24 HOUR TOTAL STATISTICS FOR TMDN/DIU2U LTG.LTU.EBT : 1 .2 .103
+------------------------------------------------------------------------------+
| ESF 28 |
| ES 0 FS 0 |
| BES 0 OES 0 |
| US 0 DS 0 |
+------------------------------------------------------------------------------+
| LOOPBACK STATUS: |
| |
| LOCAL : SET PAYLOAD : CLEAR |
| REMOTE REQUEST : SET |
+------------------------------------------------------------------------------+
| |
| ALARM STATUS : NO ERRORS(GREEN) |
+------------------------------------------------------------------------------+
H53: CIRCUIT 1 IS NOT CONFIGURED, NO STATISTIC OUTPUT POSSIBLE.

AMO-BSSU -111 BOARD SWITCH, SWITCHING UNIT
DISPLAY COMPLETED;
<DIS-SDSU:ALL,,PEN,PER3,1,2,103,0;
DIS-SDSU:ALL,,PEN,PER3,1,2,103,0;
H500: AMO SDSU STARTED

LTG1 (PERIPHERY)
------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
------------------- LTG 1 --------------------- READY
-L80XF--------SG 1 LTU 2 --------------------- READY
** .LTG 1.LTU 2.103 DIU2U-M A Q2216-X READY
CCT LINE STNO SI BUS TYPE
000 5881 PP NW READY
MULTLINE 30 . . . . . . . . . . . . . .READY
000 NO CONN
001 NETWORK SUBUNIT . TMD CO ISDN TRS/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH
002 NETWORK SUBUNIT . TMD CO ISDN CP/RES
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN UNACH/CP
003 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
004 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
005 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
006 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
007 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
008 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
009 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
010 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
011 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
012 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
013 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
014 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
015 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
016 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
017 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
018 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
019 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
020 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
021 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
022 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
023 NETWORK SUBUNIT . TMD CO ISDN READY/CP
(ALT_ROUT: N) (S1COD )
LINE: 5881 STNO: SI:
001 . . . . . . . . TMD CO ISDN READY/CP
024 NO CONN
025 NO CONN
026 NO CONN
027 NO CONN
028 NO CONN
029 NO CONN
030 NO CONN

REGEN-TDCSU:1-2-103-0,,,;
H500: AMO TDCSU STARTED
ADD-TDCSU:NEW ,1-02-103-0,2,2,0,1,30,19,19," ",2
,NI2,1,,NONE,,,2,DIDCR,N,CO,NONE,N,0,
,,,,,
,31,MANY,4,2,1,1,EMPTY,2,1,N,
,,,,,16,8,1,10,,EC&G711&G729AOPT
,"",4,DSC,Y,TRADITIO,0,S1COD,
1&&23
,N,1,4,1,0

;

AMO-TDCSU-111 DIGITAL TRUNKS
REGENERATE COMPLETED;
<

 

[donb01]

It's Monday so I don't have a lot of time to look at it for you, but I know that on some PRI your outgoing calls start at the bottom and go up, and the incoming start at the top and come down.

Circuit 01 there seem to be some reliability errors on the lower channels, and READY/BUSY/CP usually means the channel is in use by an active call. If all of those channels are in use by incoming calls, and the bottom few are out of service it is possible that you wouldn't be able to dial out.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[hamncheese]

Sometimes I've had to reset the d-channel to bring the circuit into service. Have you tried res-dssuen,1-2-103-0;
Or sometimes only the b-channels using res-dssu:bchan,1-2-103-0,1&&23;

 

[sbcsu]

The correct (and only recommended way) to reset an ISDN circuit is as follows:

DEA-DSSU:L,PEN,1-1-1-1;
ACT-DSSU:AUL,BCHAN,1-1-1-1;
RES-DSSUEN,1-1-1-1;

Then
DIS-SDSU:ALL, etc..

If you are getting READY/CP it could be the LWPAR needs to be changed for CRC4 on/off