Hipath 4000 V6 DNIT build issue 2

[MerlinJ]

I'm trying to build a new DNIT for a number that needs to be redirected. I want it so that when 85 is dialed, it dials 5085 instead. I haven't tried building one before, so I'm missing something. 78 is in use already converting from 78 to 834. When I regened DNIT and tried to add 85 using the same command line as 78 (with the new info), I received the error below. I also tried changing it to 95205085 to match the 2085 conversion, but received that same alert. I've looked at it for awhile, and realized that I need professional (HiPath) help! As far as I can tell, it wants 85 to be a DAR of STN, but to me it looks like it already is.

I've listed all of the WABE and other information below on the numbers I'm dealing with.

What am I missing? Thanks for any help you guys can give me.




<dis-wabe:Type=GEN,CD=85;
DIS-WABE:TYPE=GEN,CD=85;
H500: AMO WABE STARTED
------------------------------------------------------------------------------
| DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |
------------------------------------------------------------------------------
| | CALL PROGRESS STATE |NODE/DIGIT| RESERVED/CONVERT |
| CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO |
| |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE |
------------------------------------------------------------------------------
| 85 |. .**** ***** **... ..... .*| STN | |
| | | |DESTNO 100 |
| | | |DNNO 0- 0-100 |
| | | |PDNNO 0- 0-200 |
------------------------------------------------------------------------------

AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES
DISPLAY COMPLETED;
<dis-wabe:Type=GEN,CD=78;
DIS-WABE:TYPE=GEN,CD=78;
H500: AMO WABE STARTED
------------------------------------------------------------------------------
| DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |
------------------------------------------------------------------------------
| | CALL PROGRESS STATE |NODE/DIGIT| RESERVED/CONVERT |
| CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO |
| |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE |
------------------------------------------------------------------------------
| 78 |. .**** ***** **... ..... .*| STN | D |
| | | |DESTNO 0 |
| | | |DNNO 0- 0-200*|
------------------------------------------------------------------------------

AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES
DISPLAY COMPLETED;
<dis-wabe:Type=GEN,CD=5085;
DIS-WABE:TYPE=GEN,CD=5085;
H500: AMO WABE STARTED
------------------------------------------------------------------------------
| DIGIT INTERPRETATION VALID FOR ALL DIAL PLANS |
------------------------------------------------------------------------------
| | CALL PROGRESS STATE |NODE/DIGIT| RESERVED/CONVERT |
| CODE | 1 11111 11112 22| ANALYSIS | DNI/ADD-INFO |
| |0 12345 67890 12345 67890 12| RESULT | *=OWN NODE |
------------------------------------------------------------------------------
| 5085 |. .**** ***** **... ..... .*| STN | |
| | | |DESTNO 100 |
| | | |DNNO 0- 0-100 |
| | | |PDNNO 0- 0-200 |
------------------------------------------------------------------------------

AMO-WABE -111 DIALLING PLANS, FEATURE ACCESS CODES
DISPLAY COMPLETED;
<dis-dnit:dni;
DIS-DNITNI;
H500: AMO DNIT STARTED
+-------------------------------------------------------------------------+
| INTRTDN - 2085 |
| SARULE - 0 DISPLAY - PAGER SYSTEM ROUTING - DRTD |
| TARGET - 95205085 |
+-------------------------------------------------------------------------+
| INTRTDN - 78 |
| SARULE - 0 DISPLAY - WSTG78PAGE ROUTING - DRTD |
| TARGET - 834 |
+-------------------------------------------------------------------------+

AMO-DNIT -111 DIRECTORY NUMBER INFORMATION AND TRANSLATION
DISPLAY COMPLETED;
<regen-dnit:dni;
REGEN-DNITNI;
H500: AMO DNIT STARTED
ADD-DNITNI,2085,DRTD,0,"PAGER SYSTEM ",
NO,95205085;
ADD-DNITNI,78,DRTD,0,"WSTG78PAGE ",
NO,834;

AMO-DNIT -111 DIRECTORY NUMBER INFORMATION AND TRANSLATION
REGENERATE COMPLETED;
<ADD-DNITNI,85,DRTD,0,"old pager number",NO,5085;
ADD-DNITNI,85,DRTD,0,"OLD PAGER NUMBER",NO,5085;
H500: AMO DNIT STARTED
F12: INVALID DIGIT ANALYSIS RESULT FOR INTERNAL ROUTING DIRECTORY
NUMBER INTRTDN= 85. THE CORRECT ASSIGNMENT IS DAR=STN.
(DISPLAY-WABE,TYPE=GEN,CD=85

AMO-DNIT -111 DIRECTORY NUMBER INFORMATION AND TRANSLATION
ADD NOT COMPLETED;
<

 

[sbcsu]

Try
REG-SCSU:85;
REG-SBCSU:85;
DEL-SCSU:85,ALL;
DEL-SBCSU:85,ALL;
ADD-DNITNI,85,DRTD,0,"WHATEVER",NO,5085;

 

[MerlinJ]

I ran into this:


REG-SCSU:85;
H500: AMO SCSU STARTED

AMO-SCSU -111 STATION CONFIGURATION OF SWITCHING UNIT
REGENERATE COMPLETED;
<reg-sBcsu:85;
REG-SBCSU:85;
H500: AMO SBCSU STARTED

AMO-SBCSU-111 STATION AND S0-BUS CONFIGURATION OF SWITCHING UNIT
REGENERATE COMPLETED;
<del-scsu:85,all;
DEL-SCSU:85,ALL;
H500: AMO SCSU STARTED
F42: 85 THIS STATION IS ASSIGNED AS AN EXTERNAL STATION.
STNO = 85
F42: 85 THIS STATION IS ASSIGNED AS AN EXTERNAL STATION.
STNO =
AMO-SCSU -111 STATION CONFIGURATION OF SWITCHING UNIT
DELETE TERMINATED;
<dis-sbcsu:85;
DIS-SBCSU:85;
H500: AMO SBCSU STARTED
H17: SPECIFIED STATION(S) NOT ASSIGNED BY AMO SBCSU

AMO-SBCSU-111 STATION AND S0-BUS CONFIGURATION OF SWITCHING UNIT
DISPLAY COMPLETED;
<dis-scsu:85;
DIS-SCSU:85;
H500: AMO SCSU STARTED
H20: NONE OF THE SPECIFIED STATIONS IS CONFIGURED BY SCSU.

AMO-SCSU -111 STATION CONFIGURATION OF SWITCHING UNIT
DISPLAY COMPLETED;

 

[Iamnothere]

In your DEL-SCSU:85,ALL; AMO command, the system's response is telling you that "85" is configured as an EXTERNAL STATION. That means that "85" is a station number in another Node; therefore no SCSU record will exist in this Node. To see the configuration, perform: DIS-WABE:GEN,85;

The response should indicate that a "DESTNO" is assigned, which is the route from your current Node to the "other" Node where this "85" station resides.
If you know that this station is no longer being used, you may delete it from AMO WABE using DEL-WABE, and no one will be able to dial it.
That should resolve the problem.

Good Luck!

 

[sbcsu]

CHA-WABE:85,0;
ADD-DNITNI,85,DRTD,0,"WHATEVER",NO,5085;

 

[MerlinJ]

Thanks Iamnothere. However, I needed it to still work because xpressions uses it for out-calling. I would try to get into xpressions programming to change the calling number, but I'm not very familiar with the program. I need to look at notes again from the class.

Thanks sbcsu! I finally had a chance to try your idea, and it worked beautifully! It's just what I need until I figure out out-calling! (or whatever the new term for it is.)