After reinstalling the hiapth 4000 assistant, it works normally less a month.
the log below：
Installing ASlmt (Appl. 54 of 64) ...
Installing ASnbcs (Appl. 55 of 64) ...
Installing ASpm (Appl. 56 of 64) ...
Installing ASrds (Appl. 57 of 64) ...
Installing ASsnmp (Appl. 58 of 64) ...
Installing AStsdm (Appl. 59 of 64) ...
Installing AStska (Appl. 60 of 64) ...
Installing ASais (Appl. 61 of 64) ...
Installing AScools (Appl. 62 of 64) ...
Installing ASlabRat (Appl. 63 of 64) ...
Installing ASxie (Appl. 64 of 64) ...
Checking if all Packages/Applications have been installed ...
Updating CMS configuration ...
Writing actual RMX-database on harddisk ...
Activation of ' (First) Installation' was successful.
Initiating Unix reboot ...
Removing /var/hf content ...
No Unix HF found in First
Looking for Unix Hotfix package on RMX
scr:/uw7/prb/prb.tar) ... inst_upd_appl: ERROR: /opt/bin/uricmd swa rmxdir :scr:/uw7/prb/prb.tar failed. Trying again ...
inst_upd_appl: ERROR: /opt/bin/uricmd swa rmxdir :scr:/uw7/prb/prb.tar failed. Trying again ...
inst_upd_appl: ERROR: /opt/bin/uricmd swa rmxdir :scr:/uw7/prb/prb.tar failed
NOT found!
UX:init: INFO: New run level: 6
UX:/sbin/rc0: INFO: The system is coming down. Please wait.
UX:K00ANNOUNCE: INFO: System services are now being stopped.
INFO: Configuring ttymon contty
INFO: Starting CONSOLE Login on port tty11h with 38400HW baud.
fta: openFT parameter(s) set.
Error in 'Terminate daemon':
> StrSocket(Client)
> connect() to port 4307 failed: errno=146: Connection refused
NOTICE: IOPHBA(iophba_config): CFG_SUSPEND CALLED
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.
NOTICE: IOPHBA(iop_init): ATA Board detected
0:0,7,0: HBA : (iophba,1) IOPHBA SCSI
0,0,0: DISK : ATA HD Hitachi HTS54168SB2O
0,5,0: DISK : ATA HD STI Flash 8.0.0 01/1
Node: server
device address vec dma comment
-------------------------------------------------------------------------------
%eeE80 0x4000-0x403F 10 - PRO/100+ 00:1a:e8:18:bf:be Speed/Dx:100/F
S66FSS: Starting FSS daemon fssd done.
S68CMX: Starting CMX daemon(s): cmxd tnsxd cdsxd talmd done.
S68CMX: Setting loopback-TSP READY done.
loadcc: Boot Communications Controllers (CC)
No Communications Controller installed.
UX:modadmin: INFO: Module ipf loaded, ID = 45
Set 0 now inactive
filter sync'd
S69rfc1006: Starting rfc1006 TSP done.
Starting PALinit... May 13 12:28:43 server unix:
May 13 12:28:43 server unix: NOTICE: (Ncio_set_connection_mode) VPN received
done.
Starting FWd... done.
Checking PPP configuration ...The hostname >server< equals the CHAP name.
done
fta: openFT parameter(s) set.
Starting comid daemon
/opt/bin/comid started
Create netif.list ... done.
S93lcpCommInit: Entering LcpCommInit
S93lcpCommInit: Initialization of LC-Communication successfull
Generating host keys ... starting /opt/ASssh/sbin/sshd... done.
AShttp(tomcatctrl): Starting tomcat servlet engine as user apache
AShttp(tomcatctrl): tomcat running with PID 1319
(128)Network is unreachable: make_sock: could not bind to address [::]:80
(128)Network is unreachable: make_sock: could not bind to address [::]:443
AShttp(usswctrl): ussw started with -DTOMCAT_JK -D ADP
AShttp(usswctrl): https using insecure preinstalled default certificate
S999getpdbzip: Fetching pdb zip file from RMX using uricmd ...
S999getpdbzip: Finished.
S999getpdbzip: Unzipping pdb zip file ...
S999getpdbzip: Finished.
S999getpdbzip: Processing individual PDB files...
S999getpdbzip: Checking changes in individual PDB files...
Processing tapro
Processing tracs
Processing sdat
Processing aun
Processing bcsu
Processing dimsu
Processing kcsu
Processing uplo2
Processing refta
Processing acsu
Processing sa
Processing comgr
Processing disps
S999getpdbzip: Changing permissions...
S999getpdbzip: Finished.
S99pmamo: Creating PmAmoProc control file for refreshing cordless concentrator list
INFO: Configuring ttymon contty
S99pmamo: Forcibly removing PmAmoProc.lock if it exists
S99pmamo: Checking PmAmoProc.unlock exists
S99pmamo: Completed
INFO: Starting CONSOLE Login on port tty11h with 38400HW baud.
Activation of ' (First) Installation' was successful.
Informix SE: start daemons ...
UX:init: INFO: New run level: 6
NOTICE: IOPHBA(iophba_config): CFG_SUSPEND CALLED
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.
NOTICE: IOPHBA(iop_init): ATA Board detected
0:0,7,0: HBA : (iophba,1) IOPHBA SCSI
0,0,0: DISK : ATA HD Hitachi HTS54168SB2O
0,5,0: DISK : ATA HD STI Flash 8.0.0 01/1
Node: server
device address vec dma comment
-------------------------------------------------------------------------------
%eeE80 0x4000-0x403F 10 - PRO/100+ 00:1a:e8:18:bf:be Speed/Dx:100/F
S66FSS: Starting FSS daemon fssd done.
S68CMX: Starting CMX daemon(s): cmxd tnsxd cdsxd talmd done.
S68CMX: Setting loopback-TSP READY done.
loadcc: Boot Communications Controllers (CC)
No Communications Controller installed.
UX:modadmin: INFO: Module ipf loaded, ID = 45
Set 0 now inactive
filter sync'd
S69rfc1006: Starting rfc1006 TSP done.
Starting PALinit... May 13 12:42:22 server unix:
May 13 12:42:22 server unix: NOTICE: (Ncio_set_connection_mode) VPN received
done.
Starting FWd... done.
Checking PPP configuration ...The hostname >server< equals the CHAP name.
done
fta: openFT parameter(s) set.
Starting comid daemon
/opt/bin/comid started
Create netif.list ... done.
S93lcpCommInit: Entering LcpCommInit
S93lcpCommInit: Initialization of LC-Communication successfull
Generating host keys ... starting /opt/ASssh/sbin/sshd... done.
AShttp(tomcatctrl): Starting tomcat servlet engine as user apache
AShttp(tomcatctrl): tomcat running with PID 1319
(128)Network is unreachable: make_sock: could not bind to address [::]:80
(128)Network is unreachable: make_sock: could not bind to address [::]:443
AShttp(usswctrl): ussw started with -DTOMCAT_JK -D ADP
AShttp(usswctrl): https using insecure preinstalled default certificate
S999getpdbzip: Fetching pdb zip file from RMX using uricmd ...
S999getpdbzip: Finished.
S999getpdbzip: Unzipping pdb zip file ...
S999getpdbzip: Finished.
S999getpdbzip: Processing individual PDB files...
S999getpdbzip: Checking changes in individual PDB files...
Processing tapro
Processing tracs
Processing sdat
Processing aun
Processing bcsu
Processing dimsu
Processing kcsu
Processing uplo2
Processing refta
Processing acsu
Processing sa
Processing comgr
Processing disps
S999getpdbzip: Changing permissions...
S999getpdbzip: Finished.
S99pmamo: Creating PmAmoProc control file for refreshing cordless concentrator list
S99pmamo: Forcibly removing PmAmoProc.lock if it exists
S99pmamo: Checking PmAmoProc.unlock exists
S99pmamo: Completed
INFO: Configuring ttymon contty
INFO: Starting CONSOLE Login on port tty11h with 38400HW baud.
Informix SE: start daemons ...
UX:init: INFO: New run level: 6
PANIC: wdcsh: watchdog panic
Raw stack dump begins at 0xFFFDAA8C:
A8C FFFDAC08 C02B0440 C0000077 C01B90FF C02B0440 FFFDAAE8 FFFF6D78 C05522B0
AAC C0781DEC D6609B80 00000000 00000000 E52EEF90 00000000 00000000 00000008
ACC C01B8E54 00000003 C02B0440 FFFDAAE8 C0272C38 00000003 C02B0440 C0050E4C
AEC 00000000 C0551730 C05522B0 C0781DEC 00000000 00000292 C0F26970 E52EC670
B0C 00000001 00000001 00000292 0928B8E7 00000000 C004F76A C0781DEC FFFFFFFF
B2C 0000001C 00000004 00000008 00000010 00000000 C0056052 FFFDAB6C C04D5E34
B4C 00000000 00000000 C005809A 00000000 FFFF6D7F 00000202 E531AF08 00000004
B6C FFFDABC4 C005861A C04D5E34 00000004 C0551180 C0058511 00000010 C0055C68
B8C 00000039 00001306 0000000F 00000000 00000108 00000108 C0049875 00000100
BAC 00000212 C102382C C1023844 00000349 E531ED2C 00000046 00000000 C017B18A
Generating selective dump
Saving system memory image for crash analysis...
# = scanning memory, . = dumping to disk
(Press any key to abort dump.)
##########.##..#....................####....................................#####....#....#..#..#..#.#.......#............#................#................#................#..............#...............#.............#..............#............#...........#..............................#...........................#..............#.........#....#.#...#.................#...............#.......##.#...#...................#.......................................#..............#...#..........#........#.........#...........#.......................#...............................#...............................................................#..................................................
System memory dump completed in 1396 ticks.
DOUBLE PANIC: kernel-mode address fault on user address 0x13C
Raw stack dump begins at 0xFFFDA228:
228 FFFDAC08 C02A8BC4 C000006B C01B90FF C02A8BC4 FFFDA284 FFFF6D84 00000000
248 00000002 0000013C 0000000A 00000000 C00E61FD 00000000 0000000A 00000000
268 C01B8E54 00000003 C02A8BC4 FFFDA284 C0111931 00000003 C02A8BC4 0000013C
288 C025D5E4 00000000 C055140A C02AD359 00000000 C005FEAD 00000000 FFFDA368
2A8 FFFF6D84 C025D5E4 E5389F80 00000000 C05514F4 00000000 00000000 00000000
2C8 C100D030 00000000 00000000 00000000 C005890C 00000574 00000000 C043BFA0
2E8 00000000 0000000A 00000000 00000000 00000000 C00543FA 0000000E E5389F80
308 C025D5E4 FFFDA368 FFFDA324 FFFF6D84 C102382C C102382C 0000013C FFFF0108
328 00000108 C014CE63 00000100 00010206 FFFFFFFF 00000002 E5389F80 00000006
348 C01B90B4 FFFDAA6C 00000000 00000200 00000008 00000108 00000000 C01B2960
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.
NOTICE: IOPHBA(iop_init): ATA Board detected
0:0,7,0: HBA : (iophba,1) IOPHBA SCSI
0,0,0: DISK : ATA HD Hitachi HTS54168SB2O
0,5,0: DISK : ATA HD STI Flash 8.0.0 01/1
ADP: RMX requested Unix shutdown
ADP: RMX requested (soft) Unix shutdown
PANIC: Init died! (why = 2, what = 8)
Raw stack dump begins at 0xE2B0FABC:
ABC E2B0FC08 C02AB57C C0000049 C01B90FF C02AB57C E2B0FB18 FFFF6D78 08000000
ADC E5388D80 E5569FC0 C0055C68 00000000 C02AB57C 00000000 E2B0FB18 C0050108
AFC C01B8E54 00000003 C02AB57C E2B0FB18 C016B0D1 00000003 C02AB57C 00000002
B1C 00000008 FFFF6D78 08000000 E5388D80 00000001 0000007A FFFF6D84 00000008
B3C 00000000 00000001 E2AED190 C0166DEB 00000002 00000008 00000008 E5569FC0
B5C E2AED190 C01735B7 00000008 FFFF6D78 FFFF6D7B 00000000 E2AED190 00000001
B7C E2B00108 00000108 C0173210 00000100 00000246 C0060ED3 00000000 E2AED190
B9C 00000000 00000000 00000108 C0060CF0 00000100 00000157 C005448E 00000000
BBC 00000000 00000000 C0055C68 00000000 00000000 00000000 00000000 0000001F
BDC 0000001F 08300080 00000017 00000202 BFFFEFD8 0000001F 00000000 00000000
Generating selective dump
Saving system memory image for crash analysis...
# = scanning memory, . = dumping to disk
(Press any key to abort dump.)
##########.##.#..................####........................##############################################.......
System memory dump completed in 23453 ticks.
NOTICE: IOPHBA(iophba_config): CFG_SUSPEND CALLED
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.
the log below：
Installing ASlmt (Appl. 54 of 64) ...
Installing ASnbcs (Appl. 55 of 64) ...
Installing ASpm (Appl. 56 of 64) ...
Installing ASrds (Appl. 57 of 64) ...
Installing ASsnmp (Appl. 58 of 64) ...
Installing AStsdm (Appl. 59 of 64) ...
Installing AStska (Appl. 60 of 64) ...
Installing ASais (Appl. 61 of 64) ...
Installing AScools (Appl. 62 of 64) ...
Installing ASlabRat (Appl. 63 of 64) ...
Installing ASxie (Appl. 64 of 64) ...
Checking if all Packages/Applications have been installed ...
Updating CMS configuration ...
Writing actual RMX-database on harddisk ...
Activation of ' (First) Installation' was successful.
Initiating Unix reboot ...
Removing /var/hf content ...
No Unix HF found in First
Looking for Unix Hotfix package on RMX
scr:/uw7/prb/prb.tar) ... inst_upd_appl: ERROR: /opt/bin/uricmd swa rmxdir :scr:/uw7/prb/prb.tar failed. Trying again ...inst_upd_appl: ERROR: /opt/bin/uricmd swa rmxdir :scr:/uw7/prb/prb.tar failed. Trying again ...
inst_upd_appl: ERROR: /opt/bin/uricmd swa rmxdir :scr:/uw7/prb/prb.tar failed
NOT found!
UX:init: INFO: New run level: 6
UX:/sbin/rc0: INFO: The system is coming down. Please wait.
UX:K00ANNOUNCE: INFO: System services are now being stopped.
INFO: Configuring ttymon contty
INFO: Starting CONSOLE Login on port tty11h with 38400HW baud.
fta: openFT parameter(s) set.
Error in 'Terminate daemon':
> StrSocket(Client)
> connect() to port 4307 failed: errno=146: Connection refused
NOTICE: IOPHBA(iophba_config): CFG_SUSPEND CALLED
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.
NOTICE: IOPHBA(iop_init): ATA Board detected
0:0,7,0: HBA : (iophba,1) IOPHBA SCSI
0,0,0: DISK : ATA HD Hitachi HTS54168SB2O
0,5,0: DISK : ATA HD STI Flash 8.0.0 01/1
Node: server
device address vec dma comment
-------------------------------------------------------------------------------
%eeE80 0x4000-0x403F 10 - PRO/100+ 00:1a:e8:18:bf:be Speed/Dx:100/F
S66FSS: Starting FSS daemon fssd done.
S68CMX: Starting CMX daemon(s): cmxd tnsxd cdsxd talmd done.
S68CMX: Setting loopback-TSP READY done.
loadcc: Boot Communications Controllers (CC)
No Communications Controller installed.
UX:modadmin: INFO: Module ipf loaded, ID = 45
Set 0 now inactive
filter sync'd
S69rfc1006: Starting rfc1006 TSP done.
Starting PALinit... May 13 12:28:43 server unix:
May 13 12:28:43 server unix: NOTICE: (Ncio_set_connection_mode) VPN received
done.
Starting FWd... done.
Checking PPP configuration ...The hostname >server< equals the CHAP name.
done
fta: openFT parameter(s) set.
Starting comid daemon
/opt/bin/comid started
Create netif.list ... done.
S93lcpCommInit: Entering LcpCommInit
S93lcpCommInit: Initialization of LC-Communication successfull
Generating host keys ... starting /opt/ASssh/sbin/sshd... done.
AShttp(tomcatctrl): Starting tomcat servlet engine as user apache
AShttp(tomcatctrl): tomcat running with PID 1319
(128)Network is unreachable: make_sock: could not bind to address [::]:80
(128)Network is unreachable: make_sock: could not bind to address [::]:443
AShttp(usswctrl): ussw started with -DTOMCAT_JK -D ADP
AShttp(usswctrl): https using insecure preinstalled default certificate
S999getpdbzip: Fetching pdb zip file from RMX using uricmd ...
S999getpdbzip: Finished.
S999getpdbzip: Unzipping pdb zip file ...
S999getpdbzip: Finished.
S999getpdbzip: Processing individual PDB files...
S999getpdbzip: Checking changes in individual PDB files...
Processing tapro
Processing tracs
Processing sdat
Processing aun
Processing bcsu
Processing dimsu
Processing kcsu
Processing uplo2
Processing refta
Processing acsu
Processing sa
Processing comgr
Processing disps
S999getpdbzip: Changing permissions...
S999getpdbzip: Finished.
S99pmamo: Creating PmAmoProc control file for refreshing cordless concentrator list
INFO: Configuring ttymon contty
S99pmamo: Forcibly removing PmAmoProc.lock if it exists
S99pmamo: Checking PmAmoProc.unlock exists
S99pmamo: Completed
INFO: Starting CONSOLE Login on port tty11h with 38400HW baud.
Activation of ' (First) Installation' was successful.
Informix SE: start daemons ...
UX:init: INFO: New run level: 6
NOTICE: IOPHBA(iophba_config): CFG_SUSPEND CALLED
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.
NOTICE: IOPHBA(iop_init): ATA Board detected
0:0,7,0: HBA : (iophba,1) IOPHBA SCSI
0,0,0: DISK : ATA HD Hitachi HTS54168SB2O
0,5,0: DISK : ATA HD STI Flash 8.0.0 01/1
Node: server
device address vec dma comment
-------------------------------------------------------------------------------
%eeE80 0x4000-0x403F 10 - PRO/100+ 00:1a:e8:18:bf:be Speed/Dx:100/F
S66FSS: Starting FSS daemon fssd done.
S68CMX: Starting CMX daemon(s): cmxd tnsxd cdsxd talmd done.
S68CMX: Setting loopback-TSP READY done.
loadcc: Boot Communications Controllers (CC)
No Communications Controller installed.
UX:modadmin: INFO: Module ipf loaded, ID = 45
Set 0 now inactive
filter sync'd
S69rfc1006: Starting rfc1006 TSP done.
Starting PALinit... May 13 12:42:22 server unix:
May 13 12:42:22 server unix: NOTICE: (Ncio_set_connection_mode) VPN received
done.
Starting FWd... done.
Checking PPP configuration ...The hostname >server< equals the CHAP name.
done
fta: openFT parameter(s) set.
Starting comid daemon
/opt/bin/comid started
Create netif.list ... done.
S93lcpCommInit: Entering LcpCommInit
S93lcpCommInit: Initialization of LC-Communication successfull
Generating host keys ... starting /opt/ASssh/sbin/sshd... done.
AShttp(tomcatctrl): Starting tomcat servlet engine as user apache
AShttp(tomcatctrl): tomcat running with PID 1319
(128)Network is unreachable: make_sock: could not bind to address [::]:80
(128)Network is unreachable: make_sock: could not bind to address [::]:443
AShttp(usswctrl): ussw started with -DTOMCAT_JK -D ADP
AShttp(usswctrl): https using insecure preinstalled default certificate
S999getpdbzip: Fetching pdb zip file from RMX using uricmd ...
S999getpdbzip: Finished.
S999getpdbzip: Unzipping pdb zip file ...
S999getpdbzip: Finished.
S999getpdbzip: Processing individual PDB files...
S999getpdbzip: Checking changes in individual PDB files...
Processing tapro
Processing tracs
Processing sdat
Processing aun
Processing bcsu
Processing dimsu
Processing kcsu
Processing uplo2
Processing refta
Processing acsu
Processing sa
Processing comgr
Processing disps
S999getpdbzip: Changing permissions...
S999getpdbzip: Finished.
S99pmamo: Creating PmAmoProc control file for refreshing cordless concentrator list
S99pmamo: Forcibly removing PmAmoProc.lock if it exists
S99pmamo: Checking PmAmoProc.unlock exists
S99pmamo: Completed
INFO: Configuring ttymon contty
INFO: Starting CONSOLE Login on port tty11h with 38400HW baud.
Informix SE: start daemons ...
UX:init: INFO: New run level: 6
PANIC: wdcsh: watchdog panic
Raw stack dump begins at 0xFFFDAA8C:
A8C FFFDAC08 C02B0440 C0000077 C01B90FF C02B0440 FFFDAAE8 FFFF6D78 C05522B0
AAC C0781DEC D6609B80 00000000 00000000 E52EEF90 00000000 00000000 00000008
ACC C01B8E54 00000003 C02B0440 FFFDAAE8 C0272C38 00000003 C02B0440 C0050E4C
AEC 00000000 C0551730 C05522B0 C0781DEC 00000000 00000292 C0F26970 E52EC670
B0C 00000001 00000001 00000292 0928B8E7 00000000 C004F76A C0781DEC FFFFFFFF
B2C 0000001C 00000004 00000008 00000010 00000000 C0056052 FFFDAB6C C04D5E34
B4C 00000000 00000000 C005809A 00000000 FFFF6D7F 00000202 E531AF08 00000004
B6C FFFDABC4 C005861A C04D5E34 00000004 C0551180 C0058511 00000010 C0055C68
B8C 00000039 00001306 0000000F 00000000 00000108 00000108 C0049875 00000100
BAC 00000212 C102382C C1023844 00000349 E531ED2C 00000046 00000000 C017B18A
Generating selective dump
Saving system memory image for crash analysis...
# = scanning memory, . = dumping to disk
(Press any key to abort dump.)
##########.##..#....................####....................................#####....#....#..#..#..#.#.......#............#................#................#................#..............#...............#.............#..............#............#...........#..............................#...........................#..............#.........#....#.#...#.................#...............#.......##.#...#...................#.......................................#..............#...#..........#........#.........#...........#.......................#...............................#...............................................................#..................................................
System memory dump completed in 1396 ticks.
DOUBLE PANIC: kernel-mode address fault on user address 0x13C
Raw stack dump begins at 0xFFFDA228:
228 FFFDAC08 C02A8BC4 C000006B C01B90FF C02A8BC4 FFFDA284 FFFF6D84 00000000
248 00000002 0000013C 0000000A 00000000 C00E61FD 00000000 0000000A 00000000
268 C01B8E54 00000003 C02A8BC4 FFFDA284 C0111931 00000003 C02A8BC4 0000013C
288 C025D5E4 00000000 C055140A C02AD359 00000000 C005FEAD 00000000 FFFDA368
2A8 FFFF6D84 C025D5E4 E5389F80 00000000 C05514F4 00000000 00000000 00000000
2C8 C100D030 00000000 00000000 00000000 C005890C 00000574 00000000 C043BFA0
2E8 00000000 0000000A 00000000 00000000 00000000 C00543FA 0000000E E5389F80
308 C025D5E4 FFFDA368 FFFDA324 FFFF6D84 C102382C C102382C 0000013C FFFF0108
328 00000108 C014CE63 00000100 00010206 FFFFFFFF 00000002 E5389F80 00000006
348 C01B90B4 FFFDAA6C 00000000 00000200 00000008 00000108 00000000 C01B2960
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.
NOTICE: IOPHBA(iop_init): ATA Board detected
0:0,7,0: HBA : (iophba,1) IOPHBA SCSI
0,0,0: DISK : ATA HD Hitachi HTS54168SB2O
0,5,0: DISK : ATA HD STI Flash 8.0.0 01/1
ADP: RMX requested Unix shutdown
ADP: RMX requested (soft) Unix shutdown
PANIC: Init died! (why = 2, what = 8)
Raw stack dump begins at 0xE2B0FABC:
ABC E2B0FC08 C02AB57C C0000049 C01B90FF C02AB57C E2B0FB18 FFFF6D78 08000000
ADC E5388D80 E5569FC0 C0055C68 00000000 C02AB57C 00000000 E2B0FB18 C0050108
AFC C01B8E54 00000003 C02AB57C E2B0FB18 C016B0D1 00000003 C02AB57C 00000002
B1C 00000008 FFFF6D78 08000000 E5388D80 00000001 0000007A FFFF6D84 00000008
B3C 00000000 00000001 E2AED190 C0166DEB 00000002 00000008 00000008 E5569FC0
B5C E2AED190 C01735B7 00000008 FFFF6D78 FFFF6D7B 00000000 E2AED190 00000001
B7C E2B00108 00000108 C0173210 00000100 00000246 C0060ED3 00000000 E2AED190
B9C 00000000 00000000 00000108 C0060CF0 00000100 00000157 C005448E 00000000
BBC 00000000 00000000 C0055C68 00000000 00000000 00000000 00000000 0000001F
BDC 0000001F 08300080 00000017 00000202 BFFFEFD8 0000001F 00000000 00000000
Generating selective dump
Saving system memory image for crash analysis...
# = scanning memory, . = dumping to disk
(Press any key to abort dump.)
##########.##.#..................####........................##############################################.......
System memory dump completed in 23453 ticks.
NOTICE: IOPHBA(iophba_config): CFG_SUSPEND CALLED
Automatic Boot Procedure
Welcome to OS-Switch
Starting IX_BIOS ...
[2J[0;0;HADP BIOS (c) Fri Sep 12 10:30:55 MET DST 2003 Siemens AG
Code seg base : BA42000
Data seg base : BA6B000
PCI service directory copied.
Press 'ESC' to activate the menu
Starting UnixWare...
UnixWare 7.1.4 for the Intel386(tm) Family
(c) SCO
NOTICE: v24start: cm_intr_attach IRQ: 16
1072685056 bytes of memory were detected.
878309376 bytes of memory are in use.
840093696 bytes of general purpose memory are available.
0 bytes of memory are dedicated.
The system is coming up. Please wait.