Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HiPath 4000 v4.2.1 how to set customer i/p address in UNIX

Status
Not open for further replies.

techinu

Technical User
Sep 27, 2011
22
US
Hello, i am considering trying to set the customer I/P address in the HP4k v4 in UNIX. I was able to recover the UNIX OS and apps from SCR, and install the HF. Java console shows applet-wrapper issue and i/o http access problem . my pc is 192.0.2.50 and i target 192.0.2.5 , the assistant program loads and displays correctly but fails to display the content of uba-lan settings so i cannot change it. Thought i might try to set the customer i/p in UNIX?
 
Go through the 'client preparation' at the first page again and ensure all ok.
If you have problems then you should use either an old xp machine or a virtual xp machine on windows 7.
 
I believe Webmin is available in V5 but can't remember. Look in there and see if it lets you change it. Be careful messing with IP addresses - you can crash the system if you mess with the wrong one!


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top