Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HiPath 4000 V2.0 CODEWORD

Status
Not open for further replies.

tiagofcnmoreira

Technical User
May 12, 2015
67
PT
Hello,

I have a HP4k v2.0 system that is mainly to be used for lab and testing purposes.

Since I didn't know the passwords to the system, I followed sbcsu hard disk setup procedure and it worked ok. However, I thought I could activate Trial Mode before putting the CODEWORD, but I can't, so now I have a system installed but I can't add anything :(

I don't have access to CWT, so is there anyone who can lookup the System Number and give me the codeword, please?

Thanks in advance!
 
V2 would not have Trial Codeword
Do you have a RED or BLACK dongle attached
 
OK
Is it a 'Bypass SIM' ?
If you had it running before then you should have a Codeword for it ?

If you DIS-CODEW;
and paste here
Also because it is a SIM can you try
CHA-CODEW:TRIAL=YES;

 
It's not a "Bypass SIM"...As I said I got this from ebay and I didn't have access to the system. So I reinstalled the system using your tutorial, so it's like a fresh install. When I try to activate trial mode it gives me an error:
L01: LOGON ACCEPTED TSN 0011 ALLOCATED 16-02-25 17:21:46

AN INCONSISTENCY IN YOUR CONTRACTED SOFTWARE HAS BEEN DETECTED

ADMINISTRATION OF SWU IS BLOCKED

ALL FEASU FEATURES ARE BLOCKED

(EMERGENCY OPERATION ONLY)

PLEASE CONTACT YOUR SERVICE CENTER AND QUOTE THIS MESSAGE <
<
<dis-codew;
DIS-CODEW;
H500: AMO CODEW STARTED

SALES UNIT COUNTERS
===================

CODEWORD:

VERSION : ????
SERIAL NUMBER: 0
HARDWARE ID : FF38A788
TRIAL MODE : NOT ACTIVATED
CONFIRMATION : 0

+---------------------------------------------+-------+-------+-------+-------+
| | | | | |
| UNIT | CON- | USED | FREE |BLOCKED|
| | TRACT | | | |
+---------------------------------------------+-------+-------+-------+-------+
| COMSCENDO | 0 | 0 | 0 | |
| COMSCENDO SECURITY | 0 | 0 | 0 | |
| CORDLESS E | 0 | 0 | 0 | |
| PNE | 0 | 0 | 0 | |
| SIGNALING SURVIVABILITY | 0 | 0 | 0 | |
| CC-AP FOR AP EMERGENCY | 0 | 0 | 0 | |
+---------------------------------------------+-------+-------+-------+-------+

AMO-CODEW-111 CODEWORD FOR ADMINISTRATION LOCK IN SWU
DISPLAY COMPLETED;
<cha-codew:TRIAL=YES;
CHA-CODEW:TRIAL=YES;
H500: AMO CODEW STARTED
F07: NO (MORE) TRIAL MODE AVAILABLE

AMO-CODEW-111 CODEWORD FOR ADMINISTRATION LOCK IN SWU
CHANGE NOT COMPLETED;
<
 
It looks like the 2 trail modes were already used ?
I have tried FF38A788 but I am getting 'no records found' so it might have been deactivated, or it might be where I am looking 'from'
Maybe Don or another poster can try the FF38A788 for you as well but I have 'no records found' on Systems & Service Codewords
 
Ok, thanks...

Since you are looking up can you check by SYSTEM NUMBER?
It's this: L31905Q1526X

Thanks!!
 
Sorry - nothing,
however as I said it may be that someone in your continent would need to check, are you in North/South America ?
 
No...I'm from Portugal! And I know the system is from Germany. Does that help?
 
Try and contact the original seller,
You can do nothing without that Codeword.
Even an email of the original or a copy of the REGEN file from the original would assist you.
Maybe the seller or someone from Deutschland could try the codeword for you.
Did it come with any files/database ?
 
I'll try then!

Just one other question...The system has a MO drive that I didn't touch! Assuming it has a backup of previous system, how can I get access to it? Or change the boot to MO instead of disk?
 
OK
Put the MO disk in, if you prefer you can remove the Hard Disk beforehand.
Start it up from the MO either by removing the hdd or pressing LCT then RES to reload from the MO

Try root/hicom
as username and password when it comes up
 
Didn't work...I guess the MO it's empty!
i will contact the seller to see if they have any info!

EDIT: Just to understand...being a "fresh" system...with no CODEWORD...shouldn't I be able to activate TRIAL MODE?

Thank you for your time!
 
If you had the codeword you would not need Trial Mode.

It is probable that the seller or the person before him 'de-registered' the system with Unify/Siemens so as they could move the licences to a newer system, that means that you can not get the codeword from the codeword server.

Trial mode is used 'in the real world' when the customer needs say 24 extensions in a hurry, you add them in but find you are out of codeword so you go into trial mode.
Each run of trial mode lasts 30 days and you have only 2 runs of trial mode.

When the customer then buys the licences for the example 24 extensions you get a new codeword and that codeword gives you the 24 licenes but also re-instates the original 2 trial modes.

Request the Codeword or a REGEN file from the seller which would have the Codeword in it.

Other than that you need a new SIM card or sell the system for parts.
 
Ok,

Thank you for your explanation! I'm now enlightened...

Best Regards!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top