System performed a Unixware self-recovery during the course of this action the A1 reloaded from the GLA disk partition. The SWUs have stayed up and have not reloaded so telephony is OK. The GLA config is pretty old so I want to get the system back to referencing the proper area of the disk. A1H1E shows in service but there are no logical names activated. Configured logical name is DS: which is correct. I have tried DEA/ACT/CHA DSSM with no success. I did try deleting the logical name of DS: and renamed it :ABC: and this logical name will show activated status. This is pretty bizarre. I am hesitating to EXE-REST RELOAD of the A1 for fear this will get worse instead of better. Any hints on this problem?