Hipath 4000 IPDA

[RonnieDio1]

Hi

In Hipath 4000 v5 with IPDA is possible enable DSCP 46 e priorit 5 ?

 

[sbcsu]

Hi,
46 is 'EF' / Expedited Forwarding which is at Priority 5

In your STMIB for the remote shelf (REG-STMIB
you should have TOSPL set to 184 (EF)
Here is an example.

CHANGE-STMIB:NCUI2,17,GLOBAL,213;
CHANGE-STMIB:NCUI2,17,IFDATA,NO,"104","112",0,"AUTONEG";
CHANGE-STMIB:NCUI2,17,JB,40,120,20,4,60,200,2;
CHANGE-STMIB:NCUI2,17,SERVIF,"TRM","PPP",;
CHANGE-STMIB:NCUI2,17,SIGQOS,0,0,0,STD,NO;
CHANGE-STMIB:NCUI2,17,ASC,29100,30100,"184",NO,NO,YES,YES,PRIO1,G711A,NO,"30";
CHANGE-STMIB:NCUI2,17,ASC,29100,30100,,NO,NO,YES,YES,PRIO2,G729A,NO,"20";
CHANGE-STMIB:NCUI2,17,ASC,29100,30100,,NO,NO,YES,YES,PRIO3,NONE,NO,"30";
CHANGE-STMIB:NCUI2,17,ASC,29100,30100,,NO,NO,YES,YES,PRIO4,NONE,NO,"20";
CHANGE-STMIB:NCUI2,17,ASC,29100,30100,,NO,NO,YES,YES,PRIO5,NONE,NO,"20";
CHANGE-STMIB:NCUI2,17,ASC,29100,30100,,NO,NO,YES,YES,PRIO6,NONE,NO,"20";
CHANGE-STMIB:NCUI2,17,ASC,29100,30100,,NO,NO,YES,YES,PRIO7,G729AB,YES,"20";
CHANGE-STMIB:NCUI2,17,DMCDATA,NO,0;
CHANGE-STMIB:NCUI2,17,MGNTDATA,,8000,,443,CLASSIC;
CHANGE-STMIB:NCUI2,17,WBMDATA,"HP4K-DEVEL",,ENGR;
CHANGE-STMIB:NCUI2,17,WBMDATA,"HP4K-SU",,SU;
CHANGE-STMIB:NCUI2,17,WBMDATA,"HP4K-ADMIN",,ADMIN;
CHANGE-STMIB:NCUI2,17,WBMDATA,"HP4K-READER",,READONLY;
CHANGE-STMIB:NCUI2,17,GWSECTOR,0;
CHANGE-STMIB:NCUI2,17,DLSDATA,,10444,NO;
CHANGE-STMIB:NCUI2,17,MANLANIF,0.0.0.0,0.0.0.0,NO,0,0.0.0.0;

 

[sbcsu]

Of course your network needs to support EF as well, if you do a trace you should see that, or ask the network admin to set it to EF 184/46
EF DiffServ decimal: 184
EF DiffServ hexadecimal: 0xb8
EF DiffServ binary: 10111000 (in red: DSCP field)
EF DSCP decimal: 46
EF DSCP hexadecimal: 0x2e
EF DSCP binary: 101110

 

[sbcsu]

More info here
Link

 

[RonnieDio1]

Thanks
Agradeço a ajuda.