HiPath 4000 Feature codes

[NYPQ-EN]

Good evening all,

Grace and Peace to you all.

I am looking for a listing of HiPath 4000 Feature codes - for example
DND = #5 DND OFF = ##5

When I search I find different codes for DND and that is not the listing that I need.

Can someone show me where I can get the Feature codes that includes DND as #5
?

Thanks

 

[hipath4k]

dis-wabe

 

[sbcsu]

Hi
There are no 'Default Codes' because you can create the ones you prefer, however there may be standardized codes for your territory.
If you wish to find the ones that are on your current system then
REG-WABE;
and/or
DIS-WABE:GEN;
will give you all the codes.
If you use 'ComWin Edit' - (highlight a line and press Control & TAB - first complete MACRO Retrieve system variant)
You will be able to decode what each 'DAR' means.

I normally add in each 'DAR' once with a non-used code
For example
ADD-WABE:**901,,,ADND,N;
ADD-WABE:**902,,,DDND,N;

In that way (add each DAR once) then every option is available for the system.
More DAR's are added for each version of HiPath/OpenScape Voice that is released so a copy of the ones that I use might not fill in all the ones you require.

 

[Moriendi]

Need to specify the dial plans too, or you'll only get the valid for all dpln.

dis-wabe:gen,,0&&15;

 

[donb01]

The back of the Users Guide for the phones lists the most commonly used feature activation codes. You can also get the Analog reference guide which will also list the commonly used codes.

Just because they are listed in the book does not mean they are enabled or programmed on your system, and ALSO that you have COS permissions to use some of them, or they are turned on in FEASU - for example I can deactivate DND system wide with FEASU (or turn it on if it's not). Try DIS-FEASU; to make sure the feature you want is activate.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA