hipath 4000 DID numbers change

[ashutosh2501]

Hi all,
we are struggling with programming of hipath 4000 v5, in absence of official support in India.

we have ISDN PRI bearing number 6091 9200 with 30 channels which is changing to 6098 3200
There are 500 users with existing numbers from 9200 to 9699...
we need to change these numbers to 3200 to 3699....
Can someone help with the commands in detail to effect so?

Also presently 36 code is used for SIP dialling which needs to changed to 60...

Please assist us to come out of high and dry in present Unify scenario...

 

[ashutosh2501]

@sbcsu Please help

 

[masviss]

You are changin all subscriber number from 3200 to 3699
ADD-WABE:3200&&3699,,,STN;
CHA-SDAT:9200&&9699,data,3200&&3699;
And you change the first digit of DID from 9 to 3
CHA-TDCSUEN=1-X-X-X,SUPPRESS=9,DGTPR=3,DEV=S2CONN,BCGR=1;
That is all.
DIS-WABE:GEN,36;

 

[sbcsu]

That is incorrect.
If you suppress=9 then you stop the first 9 digits coming in to the system.

Please display the current TDCSU;

DIS-TDCSUEN=X-X-X-X;

 

[RonnieDio1]

If you want to maintain the current number and just change the DID, use AMO rufum for conversion.

 

[ashutosh2501]

how do i check the DID of all or one extension range?
how do i change the DID number? (4 digit)

 

[ashutosh2501]

How do I suppress all other digits except last four and assign that DID number to a particular extension?
How Do i do it for a range?

 

[sbcsu]

Please display the current TDCSU;

DIS-TDCSUEN=X-X-X-X;

 

[masviss]

Yes, that is incorrect(CHA-TDCSUEN=1-X-X-X,SUPPRESS=9,DGTPR=3,DEV=S2CONN,BCGR=1
Sorry, it`s my mistake.
Must be
CHA-TDCSUEN=1-X-X-X,SUPPRESS=1,DGTPR=3,DEV=S2CONN,BCGR=1;
After that you will get from local exchange DID=9200 and TDCSU will
change first digit to 3200.

 

[ashutosh2501]

I think I am not able to explain the problem.

The PRI numbers have changed say from 66918200 to 66983600.
earlier extension numbers are 8200 on wards.
Now what we wish is...
The extension numbers should be changed.
The DID route to be fixed as per new extension number

 

[sbcsu]

Add the new range of numbers in the dial plan: ADD-WABE:3600&&3699,,,STN,N;
Change the extensions to the new numbers.
CHA-SBCSU:STNO=8201,NEWNO=3601; etc.

 

[masviss]

Please display the current TDCSU
DIS-TDCSU:1-X-X-X;