Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hipath 3K - which cards support T1 lines?
- Thread starter jnzy111
- Start date
The SLA24 is for analog phones
THE SLMO24 is for optiset phones
TMST1 is typically the T1 card used for PRI or CorNet spans
TMGL8 is for common CO trunks (I believe)
PSU is the power supply.
If you are using Manager E you should be able to go into the Lines/Networking area and you should be able to see what ports are in use on any TMST1 or TMGL8 cards.
It's been a while since I've been in the software, but that should be pretty close.
THE SLMO24 is for optiset phones
TMST1 is typically the T1 card used for PRI or CorNet spans
TMGL8 is for common CO trunks (I believe)
PSU is the power supply.
If you are using Manager E you should be able to go into the Lines/Networking area and you should be able to see what ports are in use on any TMST1 or TMGL8 cards.
It's been a while since I've been in the software, but that should be pretty close.
- Thread starter
- #3
- Status