Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hipath 3800 configuration

Status
Not open for further replies.

Lhemoz

Technical User
Jun 28, 2023
3
BR
Hello everybody!!

My name is R. Lhemoz, I'm a telecommunications technician and I have a question about a HiPath 3800 configuration.
I have 2 analogue lines arriving in a TM2LP (line 1 7801 and line 2 7802) and 3 KS telephone sets (extension 100, 101 and 102) in a SLMOP2.

The settings I want are:
1° Extension 100 can only make internal calls (between extensions);
2° Extension 101 will only be able to make external calls through line 2 (7802), taking this line through zero ("0").
3° Extension 102 will only be able to make external calls through line 1 (7801), picking up this line through ("0") zero.

Could someone help me with this configuration?
 
Hi.

Check these:
Settings -> Classes of service -> Station (Day and Night)
Settings -> Classes of service -> Group Assignment -> CON Matrix
Settings -> Least cost routing -> Dial plan

I attached offline.kds.
This is just a rough example and most likely it needs some corrections.
 
 https://files.engineering.com/getfile.aspx?folder=92579d8b-8117-42ef-a40f-88334eb18806&file=offline.kds
very very very thank you!! , I'll check it out right now!!
 
plokijuh, It worked here. Thank you one more time!

Now I'm going to adjust the numbering plan to make out-of-state calls:

"0" (pull line) + 041 "operator number" + 011 "DDD - status code" + "phone number" 3211-6655

I am from Brazil.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top