Hipath 3700 V4 HG1500 (HXGM2)

[powellgreg]

i have a hipath 3700 v4 with a HG1500 (HXGM2 v2. the one with the 6pin ps/2 type port)

i have the serial cable to connect to it but i do not have the softwer.

can some please help me/tell me how i can configure this card.

 

[Bas1234]

Just connect thru the manager E software, in the left pane you see a link called Xpress@LAN > No on SSL

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[powellgreg]

Version 2 does not support web access by clicking the link in manager E.

I need to change the IP address on the card.

 

[Leeky27]

You need a program called manager I, you can still download it via Etac i think. The lead you speak of should have a ps2 mouse type din plug connector and you may need to set up a SLIP connection from your pc to enable this lead to work if you do not know the Ip address that you can configure the card from.

If you have any more difficulties my please contact lee@lksolutions.info and i may be able to help you further.

 

[powellgreg]

Hi Lee

thank you for your responce. i have looked for Manager I on Etac before and have not found it.

the cable i have is the ps2 mouse type.

I know the current ip address of the card but i need to change it as our network is on a different ip range.

any help/advice would be most grateful.
Thank
Greg

 

[Bas1234]

Here you have the Manager-I

http://tiny.cc/Man-I

You need to setup a SLIP connection, if i find the doc for it i'll post it later.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[powellgreg]

Hi Bas1234

Thank so much for the link to Manager-I

I'd be so grateful of any help with tryig to change the IP address.

Thank
Greg