Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HiPath 3500
- Thread starter don1159
- Start date
I have a whole network of 30's and 80's and I have never had system features of any kind accessible across CorNet. I would be interested to find out if you get this to work - our switchboard operators would love to find a way to park calls across the network.
Call Park and Confference will not work in combination with Siemens DISA, DISA can only handle 1 incomming call at a time.
For call Park use an analog port on the other side. When a call comes in let them transfer it to that analog port and the other end does a *59XXX (analog port) You could try to use a Virtual user but i'm not sure if that will work.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
For call Park use an analog port on the other side. When a call comes in let them transfer it to that analog port and the other end does a *59XXX (analog port) You could try to use a Virtual user but i'm not sure if that will work.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged
___________________________________________
- Status