Hi Everyone,
I have been asked to install an EXMR board on a Siemens 3500 for an External Music On Hold source. I presume they have no Analogue ports spare to use. I have never done this on a Siemens before.
Will I need to mount a Cinch/Phono/RCA Socket onto the dedicated position on the front of the case (by the Alog device ports) and then wire it onto the EXMR card?
What programming changes will need to be set to enable this?
If they do have an analogue port available that I could use, what are the programming steps required to configure one of those for External Music On Hold?
Regards
Mark
I have been asked to install an EXMR board on a Siemens 3500 for an External Music On Hold source. I presume they have no Analogue ports spare to use. I have never done this on a Siemens before.
Will I need to mount a Cinch/Phono/RCA Socket onto the dedicated position on the front of the case (by the Alog device ports) and then wire it onto the EXMR card?
What programming changes will need to be set to enable this?
If they do have an analogue port available that I could use, what are the programming steps required to configure one of those for External Music On Hold?
Regards
Mark