Hipath 3000 Updating time on phone

[Gambit88]

Hello

I have a client with HiPath 3000 where the time on the phone is out.

I am trying to change the time remotely by using the 'Online Mode' function then using *95 but afterwards I have gotten a bit confused.

When it asks for a username and password I then put in 31994 for both but I can not find any option on the menu to change the Time.

I have read before that you go to menu 19 then submenu 13 but when I go into 19 there is no option for 13.

Can anyone help

 

[sbcsu]

If the system has access to ISDN it will automatically update the time from the carrier.

To setup System Time and System Date you should use the first system phone (as example: the system phone connected to the first Up0/E port of your HiPath communication system), so: *95 -> Username / Password -> Select Menu 19 -> Select Submenu 13 -> Insert 4 digits Time (HHMM), select "V" (OK) then next submenù (the 14) enter 6 digits date (DDMMYY), select "V" (OK) and you should hear the confirmation double tone from the system phone.

 

[Gambit88]

Hi sbcsu,

Yeah I have seen that information, I think the problem I have now is that the user '31994' does not have the user admin associated with it anymore.

Is there anyway to default that user as I am unable to go into User Administration to change the settings