HIPATH 150E TO CISCO ASYNCH PORT FOR GUI

[teletubby5e]

Has anyone had any luck configuring a Cisco 2500 series router with an asynch cable to the serial interface of a Siemens PBX for being able to use the GUI via telnet instead of dialing in or hooking up directly?
Thanks, Jeff

 

[sunweb]

Hi Jeff,
What normally I use I am the cable management of router Cisco to configure a central office HiPath 3000 or same Hicom 150. The cable management that I am speaking is the blue one with DB 9 in one of the extremities and RJ45 in the other, however you must also have the suitable ones of RJ45 for DB 9.

Greetings