High Utilization on NW 5.1 Server 1

[10021964]

I have a problem with a Novell Server 5.1, SP2a. On the Server run ZENworks 3 with SP1 and NDPS. One day after Server starts I see a high utilisation (over 80%). On the Portal/Profiling & Debug Information I see over 180 Server Processes with status delayed.

I take only HP Gate and Novell Gate in NDPS.

Any Ideas ?

 

[DrGreen26]

There is a TID on novell's website for tuning a server. I would suggest that you review

HTTP://SUPPORT.NOVELL.COM

and search for TID #10012765 which applies to Netware 4.x and 5.x as well as zenworks. This should help you resolve your bottleneck and get the servers optimal settings in place.

Mark C. Greenwood, CNE
m_jgreenwood@yahoo.com

CNE 4.11 and CNE 5 certified. BS Degree in MIS. Working in the industry for 8 years.

I work with NT servers, NDS for NT as well.

 

[Keebler]

Hi,

I have had the same problem. I unloaded the Broker and reloaded it and this seems to drop the utilization.

Regards
Chris

 

[MarcS1]

Have a look at TID 2942996

This details problems with HPGATE, sounds like your problem