High Temperature: GSR12006 and Catalyst 6509

[leekb]

Dear all,

I have a couple of questions about Cisco equipment and their associated show env output. In a typical controlled environment with ambient temperature of 22C, what should be the normal reading of "show env temperature" of a 12006 series GSR. What do you think of the output below, is it too hot for a 12006 living in ambient temp of 22C?

COREROUTER-01>sh env
Slot # Hot Sensor Inlet Sensor
(deg C) (deg C)
0 36.0 27.0
1 37.5 26.0
2 36.0 28.0
3 33.0 27.5
7 39.0 30.0
16 30.0 28.0
17 33.5 26.0
18 28.0 27.0
19 27.5 28.5
20 26.5 27.0
24 NA 29.5


How about a Catalyst 6509? Is the output below too hot for a 6509 in ambient temp of 22C?

module 1 power-output-fail: OK
module 1 outlet temperature: 29C
module 1 device-2 temperature: 36C
RP 1 outlet temperature: 32C
RP 1 inlet temperature: 37C
EARL 1 outlet temperature: 32C
EARL 1 inlet temperature: 27C
module 2:
module 2 power-output-fail: OK
module 2 outlet temperature: 33C
module 2 device-2 temperature: 34C
RP 2 outlet temperature: 32C
RP 2 inlet temperature: 37C
module 4:
module 4 power-output-fail: OK
module 4 outlet temperature: 37C
module 4 inlet temperature: 33C
module 5:
module 5 power-output-fail: OK
module 5 outlet temperature: 33C
module 5 inlet temperature: 35C
module 6:
module 6 power-output-fail: OK
module 6 outlet temperature: 35C
module 6 inlet temperature: 34C
module 7:
module 7 power-output-fail: OK
module 7 outlet temperature: 34C
module 7 inlet temperature: 32C
module 8:
module 8 power-output-fail: OK
module 8 outlet temperature: 33C
module 8 inlet temperature: 30C
module 9:
module 9 power-output-fail: OK
module 9 outlet temperature: 33C
module 9 inlet temperature: 34C


Your information is very much appreciated. Thanks in advance.