CS1000 SG (Opt 61)
Release 5.0
Up to date on patches
Hello,
I'm working on an install and I'm trying to figure out why the high speed link will not come up. The carrier comes up at 100MB Full. I have rebooted so many times both cores. I've replaced the cable, reseated the pentium cards. Anyone have any ideas as to how to get the LCS HSP state UP? Is there something that can interfere with bringing this link up? My elnk is fine and is up at 1000 Full.
Any ideas welcomed!
Here is the HSP:
stat hsp
LCS HSP STATE is DOWN
HSP LINK CARRIER: OK
Auto Negotiation: Enabled
Auto Negotiation Completed: YES
Actual Line Speed: 100 Mbps
Actual Duplex Mode: Full Duplex
Ethernet (gei unit number 1):
Internet address: 127.2.0.2
Broadcast address: 127.255.255.255
Ethernet address: 00:c0:8b:0a:ee:8b
Netmask: 0xff000000; Subnetmask: 0xff000000
0 packets received; 16 packets sent
0 input errors; 0 output errors
0 collisions