I have a 3070 Sopho, 2 consoles SV35 that works and a kit for the console SV60E (cd + software + dongle license LIC file, Fritz ISDN modem, PC with Windows XP Professional SP3).
I installed it on a board DTX-I7 (an even address in the 2B+D interface for the PC, signalling group 6404. and the second circuit (odd address) for the telephone D320/4, signalling group 090F).
dibrds:1011,13;
SHELF BRD CRT TYPE SUBTYPE MAIN/SLAVE HW-TYPE SIG-GROUP
1011 13 - 11 - master 255 090F
WARNING: Board contains modified or no PCT's
RESOURCES ON BRD:
SHELF BRD CRT RES-TYPE HW-TYPE SIG-GROUP MAC-ADDRESS
1011 13 4 OCT 255 6404 -
1011 13 5 LCT 255 090F -
1011 13 8 LCT 255 090F -
1011 13 9 LCT 255 090F -
1011 13 10 LCT 255 090F -
1011 13 11 LCT 255 090F -
1011 13 12 LCT 255 090F -
1011 13 13 LCT 255 090F -
1011 13 14 LCT 255 090F -
1011 13 15 LCT 255 090F -
dicdnr:1011,13,4&5;
SHELF BRD CRT TYPE DNR-BSPT USABLE MSN
1011 13 4 Digital operator console 2004
1011 13 5 LC 2005-95 Yes 3
I have dial tone from D320 / 4 (DNR 2005)
I installed ISDN modem, CAPI / TAPI / ISDN WATCH, THE SOPHO Supervisor app Installing 60E SOFTWARE,
I selected Stand-alone, I choose 'MASTER' in case of a stand alone system. Also I selected during setup of the Operator Directory 'GENERAL'. When the installation was completed, I loaded the license
I added an operator name/passw. When I try to log in …opening connection ISPBX and the following message appears:
the call handling application cannot get connection with the ispbx
ISDN watch B2 is green.
What to do to connect?
I installed it on a board DTX-I7 (an even address in the 2B+D interface for the PC, signalling group 6404. and the second circuit (odd address) for the telephone D320/4, signalling group 090F).
dibrds:1011,13;
SHELF BRD CRT TYPE SUBTYPE MAIN/SLAVE HW-TYPE SIG-GROUP
1011 13 - 11 - master 255 090F
WARNING: Board contains modified or no PCT's
RESOURCES ON BRD:
SHELF BRD CRT RES-TYPE HW-TYPE SIG-GROUP MAC-ADDRESS
1011 13 4 OCT 255 6404 -
1011 13 5 LCT 255 090F -
1011 13 8 LCT 255 090F -
1011 13 9 LCT 255 090F -
1011 13 10 LCT 255 090F -
1011 13 11 LCT 255 090F -
1011 13 12 LCT 255 090F -
1011 13 13 LCT 255 090F -
1011 13 14 LCT 255 090F -
1011 13 15 LCT 255 090F -
dicdnr:1011,13,4&5;
SHELF BRD CRT TYPE DNR-BSPT USABLE MSN
1011 13 4 Digital operator console 2004
1011 13 5 LC 2005-95 Yes 3
I have dial tone from D320 / 4 (DNR 2005)
I installed ISDN modem, CAPI / TAPI / ISDN WATCH, THE SOPHO Supervisor app Installing 60E SOFTWARE,
I selected Stand-alone, I choose 'MASTER' in case of a stand alone system. Also I selected during setup of the Operator Directory 'GENERAL'. When the installation was completed, I loaded the license
I added an operator name/passw. When I try to log in …opening connection ISPBX and the following message appears:
the call handling application cannot get connection with the ispbx
ISDN watch B2 is green.
What to do to connect?