Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hi, i want 1 machine to be able to
- Thread starter adsfx
- Start date
As far as I know you can only access 1 work group at a time.
you can assign static IP's to all machines and build them into your DNS tables, this should allow you to see all of the computers, but they would all have to be assigned to the same work group, I think.
julius.gazdag@centurytel.com
Im a Telco guy, I can get you where you want to go, but I can't guarantee it will work when you get there!
you can assign static IP's to all machines and build them into your DNS tables, this should allow you to see all of the computers, but they would all have to be assigned to the same work group, I think.
julius.gazdag@centurytel.com
Im a Telco guy, I can get you where you want to go, but I can't guarantee it will work when you get there!
Serbtastic
Vendor
One computer cannot be a member of more than one workgroup/domain at the same time, but it certainly CAN access multiple workgroups/domains at the same time.
As for the different IP address issue, just assign a second IP address/subnet mask to the NIC in your machine.
As for the different IP address issue, just assign a second IP address/subnet mask to the NIC in your machine.
- Status
Similar threads
- Locked
- Question