hi guys i am new to forum .. i hv a 1

[ishtiaqaj]

hi guys i am new to forum .. i hv a proble.. i am wrking in company wher i hv panasonic kx-td 100 pbx already deployed.. first problem is that i don't have the software of pbx and second is that we want to add more extension in it.. what is needed hardware or software.. plz help... it has alread 32 extension...

 

[obtsystems]

what cards are in the system? (will say on front of each one)

 

[LkEErie]

Do u hv a phn? Us it 2 call a dlr.

 

[vaah]

Try google upcmc for the software,
What pbx do you have?tda100 or tde100?

 

[cwc3]

Ys eye concr wth crl!!

http://www.thetelephonemanonline.com

 

[ishtiaqaj]

panasonic kx-tda 100

 

[ishtiaqaj]

panasonic kx-tda 100
model: PSLP-1453
there are four cards..
LCOT 8
DHLC 8
DHLC 16
DHLC 16

can ny one explain these card.. i ma new to telphone exchanges...

 

[LkEErie]

TRhis took about 15 seconds on the internet.

http://www.telavip.com.ve/manuales/Hybrid IP-PBX Installation Manual KX-TDA100 KX-TDA200.pdf

CALL YOUR DEALER! You don't have enough skillz to work on the system yourself.

LkEErie

 

[cwc3]

I think you need to master typing skills be for moving on to IT and Programming!!

http://www.thetelephonemanonline.com

 

[ishtiaqaj]

guyz i hv master degree in computer science.. bt i dont familir with pbx just guide me i can do it.. plz...

 

[LkEErie]

How's that degree working out for you? Was some language involved in the degree? How did you make it through the degree program without knowing how to write formally or read a manual?

Pretend the TDA is a computer. You have an instruction set and it's IN THE MANUAL.

Now get going and don't bother to beg for "guidance" when you can't even help yourself.

or "urself" in your stupid shorthand txtspeak.

LkEErie

 

[cwc3]

It must be an Elvis Masters Degree no one with a degree would type like a 2 year old??

http://www.thetelephonemanonline.com

 

[ishtiaqaj]

i prob from the net and found that LCOT8 is trunk card. wch support 8 analog propetry lline.
and DHLC16 is digital hybrid line card wch support 16 extesion.. and now i want the software to connect the exchange to my laptop to add more DHLC16 card and manage it.. tell the procedure.. aad dont make fun guyz because "no one know everthing"..

 

[cwc3]

The procedure is to get the manuals in your native language and read them or was knowing how to read not a requirement for your degree? and download the software from the dealer website in your country....

http://www.thetelephonemanonline.com

 

[LkEErie]

The problem with reading is in our country, there is no DHLC16. It's a DLC16 or DHLC8. DLC stands for DIGITAL LINE CARD and LCOT is Loop CO Trunk. The HYBRID line card only comes in 8 ports. I think that was in the very first section of the manual you must not have read.

Since you have that degree, you ought to be telling us how to install this stuff. I only went to Panasonic school and I was on the 9 year college plan without a degree......

LkEErie

 

[Wanet Telecoms]

First you don't need the console to wire an extension.Do the physical wiring first then come back with results to be guided on figuration having got the Maintenance console.

Remember you should be able to identify the free pairs from the DHLC 8 ,DHLC 16 ,DHLC 16 cards and choose where to terminate your additional extension.

If using a two pair or more,identify the extension number nearest to the point where you want to add an extension and borrow a pair if the point is far from thE PBX.

 

[ishtiaqaj]

thnks to all i appricite your response... tell me when we add a extension card then we configure it throuh console aur its plug n pla...

 

[Wanet Telecoms]

You have provision for 24Digitals and 16Analogues according to the cards you listed.How many of which? do you have installed?I mean how many digitals do you have installed and how many analogues?What type (Digital or Analog?) do you want to add.

Your response is not clear to my previous question.Makes helping difficult.

 

[Wanet Telecoms]

Sorry 28Digitals 20Analogues

CARD ANALOGUES DIGITALS

DHLC 8 4 4

DHLC 16 8 8

DHLC 16 8 8

TOTAL 20 20


I SUPPOSE

 

[ishtiaqaj]

all port aur full i want to add one more DLC16 card and configure it for a new block that is under construction..