dmao
IS-IT--Management
- Dec 9, 2009
- 8
Hi, everyone, I deployment dual line phones in vg224. which fxs ports register CM8.5 with sccp. The dual lines phone work under one dn number. share line way. VG224 configured
stcapp supplementary-services
port 2/0
hold-resume
port 2/1
hold-resume
Problem:
the dual phone work fine with separate line, but when hold line1 during the calling, press the line2 and get no response(no dial tone), and if use line2 to make call and hold , the line1 will have dial tone, also can make or get a call.
any replies will be very appreciated.
stcapp supplementary-services
port 2/0
hold-resume
port 2/1
hold-resume
Problem:
the dual phone work fine with separate line, but when hold line1 during the calling, press the line2 and get no response(no dial tone), and if use line2 to make call and hold , the line1 will have dial tone, also can make or get a call.
any replies will be very appreciated.