Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi all, Would like to ask any po

Status
Not open for further replies.

jainul

Technical User
Jul 30, 2023
2
AE
Hi all,

Would like to ask any possible idea for me to login into my kxtda100. I getting error invalid password(E030103) thru usb by using the password of 1234 or 0000. I had try to reset the system on the DMPR card by pulling off the power and put it on init state and slide to normal after I turn it on. But I think the attempt to reset it fail as I can't login to the console. So can anyone advice me how to login to the console.thread936-1750793
 
 https://files.engineering.com/getfile.aspx?folder=5d7910e9-70d3-4f0b-9bd5-a26f7adeffaf&file=Capture_ojgxm8.png
i think you make wrong way to do load default, pls try step by step as :
- switch the button to init (the red led will slow flash)
- press Reset button (the red led will fast flash)
- switch the button to normal and waiting, the system will off led in all cards and reading SDcard for load default setting. when all Led in all cards turn on green, the system have loading finish.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top