Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi All, I have an IPLDK 20 ver 3.9

Status
Not open for further replies.

Jonah29

Programmer
Oct 4, 2015
203
GB
Hi All,
I have an IPLDK 20 ver 3.9 with ISDN/BRI lines. I have set a couple of Ring Groups on 620 and 623. I have named the groups but for some reason the names are not displaying on the phones’ lcd display if the groups ring on those phones. If I name the ddi the ddi name will display. I’m sure I have used a setting somewhere but can’t for the life of me think where it is. I definitely have another client using an ipldk20 on 3.9 with the names of the groups displaying how I want.
Regards
Mark
 
Hi

Take the name off the DDI and the ring group name will show.
 
hi Mr Phones,
i had already tried that and it made no difference. Thanks.
Regards
Mark
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top