Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HFA Telephone + PC in various VLAN

Status
Not open for further replies.

akineo

Technical User
Jan 12, 2022
48
UA
Hi
1. LLDP med: on switch TP-LINK TL-SG2428P set trunk port with two VLAns - 650 (TEL) and 100 (DATA), port config LLDP-MED enable, on the telethone set discovery mode - LLDP med --- and nothing working (tel and PC cant obtain ip address)
or
2. MAnual VLAN ID with DHCP -- on the telephone set VLAN ID 650б on PC network card set VLAN ID 100 - telephone working but PC cant obtain ip address

Can You explain to me how confige LLDP MED mode? Thanks you
 
Is the PC port enabled on the phone?
By default it is disabled in my experience.
 
This issue was solved by adjustment network switch
on the telephone must be enabled LLDP-Med
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top