Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

help

Status
Not open for further replies.

sashan

Programmer
Jul 25, 2006
21
PE
in a PRI has the 2118516 line, I assign it to a phanton extension 3516, this extension has to ring on the extension 1241 and at the same time it can be taken for a bottom of the telephone set.
 
There's no question, at least not that I understand either.

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
sure it does, we both need a double then read it fast.. english may not be his 1st choice... two basic ways to get a 7 digit number to ring a station.. did (ddi) and use the idc to change the digits to the dn.. (ld 49) or auto yes and assign the dn at the atdn on the trunk.. but if you want to send that to a phantom, (why). it can not be key 0 on a physical set.. you can use an internal redirect.. maxp 1 acd ncfw to key 0.. or again the idc, change the digits you get from the provider to match the dn..

idc.. in ld 49 prt idc, then chg or add a table, then go to the rdb (ld 16) and enter idc yes, then the table number for days and/or nights

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top