Help with Time Sync.

[LyallJ]

I have 2 servers, one is running Novell 5.0 (Primary) and the other is running Novell 5.1 (sencondary). When I type "time" at the server console, It says that time is NOT sync. But when I go through dsrepair and everything else, it says that it is sync. I am getting a fault that APC says it due to the time sync. So until I get the time working, I can not clear this fault. Any help would be greatly appercated. X-) s-) X-)

 

[yvfwc]

Are you getting any errors when running dsrepair? Is the NW5.0 server set as TIMESYNC Type - "Single" and Default Time Server Type - "Single" and TIMESYNC Service Advertising - "On"? The NW5.1 server should be set as TIMESYNC Type - "Secondary" and Default Time Server Type - "Secondary".
Both should be set:
TIMESYNC Configured Sources - "Off"
TIMESYNC Directory Tree Mode - "On"
TIMESYNC Hardware Clock -"On"

You also might want to do a NDS Health Check, see:

http://support.novell.com/cgi-bin/search/searchtid.cgi?/10012858.htm

Good luck,

Mark ;-)

 

[LyallJ]

As a matter of fact, this is what was wrong with it. "When all else fails, read the manual!" Thanks for the help anyway.

LyallJ X-)