Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with this error.

Status
Not open for further replies.

karlospr

Programmer
Apr 23, 2009
1
Alarm 327 - Core Telephony - "Slip Overflow" short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

this is happening like every minute on the BCM, the thing is that the set receiving the calls sometimes during the day gets a Normal Clearing message, then reboots and calls are received normal for some time then another normal clearin.
I change the set keeps doing it, rerun cables and keep doing it.

Anyone have any ideas....

thanks in advance
 
Apply the Latest SU patch for your system.

Or try a reboot to see if fault clears.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top