Help with RRAS config.

[SelbyGlenn]

Hi there,

I have a server with 2 NICs on two subnets and I want the server to act as a router.

The setup is as follows:

NIC1:
IP = 10.0.0.1 / 16
G/w = 10.0.0.254

NIC2:
IP = 10.1.0.1 /16

I've installed RRAS and ran a custom wizard and setup LAN Routing but it doesn't work.


I have a second server with IP address 10.1.0.2. I can ping 10.1.0.1 and 10.0.0.1 but can't ping anything on the other side of the 10.0.0.254 gateway.

Any help would be most apreciated.

Thanks,
Glenn.

Glenn
BEng MCSE CCA