I am using Proxy 2.0 for a firewall and vpn access to my network. It is running on NT 4.0 with all the latest service packs. Behind it I have a W2k server with all the latest service packs. My problem is when I try to vpn in from the out side (on a w2k pc)I can not see the network. Using the vpn connection that comes with W2k on the client and have enabled the user account to allow for dial in.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations sizbut on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help With Proxy 2.0 and W2K VPN
- Thread starter BDW1969
- Start date
Have you tried doing the "route add" on the computer outside the network. How I have have mine set up is I dial up the VPN using the computer in the internet using an IP from the network I'm dialing into and once connected and authenticated I do a route add <IP number range> <subnet> through the IP I'm dialing in on.
I.E.
The internal IP I'm using is 192.168.25.10 that is what I configure my outside the network computer
Once connected I then do the route add command and route for internal IP's.
route add 192.168.25.0 mask 255.255.255.0 192.168.25.10
then you should see that subnet.
Hope it helps
I.E.
The internal IP I'm using is 192.168.25.10 that is what I configure my outside the network computer
Once connected I then do the route add command and route for internal IP's.
route add 192.168.25.0 mask 255.255.255.0 192.168.25.10
then you should see that subnet.
Hope it helps
- Status
Similar threads
- Locked
- Question
