Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help with modem...
- Thread starter avalosgl
- Start date
Admintool
1. run the admintool
. select browse and serial port
. select port a or b
. select edit and modify
. select the expert mode
. set the baud rate
. set for bi-dir
Connect the modem on port a or b on the sun box.
In /etc/remote there is a line for hardwire. The default is port b . You can edit that port to match where the modem
is attached.
You can do this command : tip hardwire
You should get a connect message.
If you get a connect msg type (at) and the modem should respond.
TO EXit from tip do a : shift ~ . (or do a man on tip)
1. run the admintool
. select browse and serial port
. select port a or b
. select edit and modify
. select the expert mode
. set the baud rate
. set for bi-dir
Connect the modem on port a or b on the sun box.
In /etc/remote there is a line for hardwire. The default is port b . You can edit that port to match where the modem
is attached.
You can do this command : tip hardwire
You should get a connect message.
If you get a connect msg type (at) and the modem should respond.
TO EXit from tip do a : shift ~ . (or do a man on tip)
- Status
Similar threads
- Locked
- Question