Help with manual VPN server setup

[flipperc]

OK, I can't figure this one out.

I have SBS 2003 Standard with one NIC installed.
I need to set up an IPSec VPN with Routing and Remote Access.(currently we're just using the "Incoming Connections" option in Network Connections, which is PPTP & not very secure)
Because I have one NIC, remote access will not run the wizard so I have to set everything up manually. I've been failing miserably & I can't find anything anywhere that has a walkthrough.

Any help?

 

[HalComps]

hope these will help

http://openvpn.net/howto.html

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b6a.html

 

[flipperc]

Thank you for the links. I'll check out thr Open VPN.

I was hoping for a wayo do it with SBS. I thought that SBS Standard included the ability to be an IPSec VPN server out of the box. Am I wrong?

Thanks in advance.

 

[HalComps]

try this site. has lots of information that may be handy

http://www.smallbizserver.net/Default.aspx?tabid=266&articleType=CategoryView&categoryId=25